I have an HP Laser Jet 1320. The error light with the triangle and the explanation point is flashing. There is no paper jam. I have turned off the unit and plugged it back in. Can you please tell me what the error message is?

laser jet 1320 cautuion light
http://answers.microsoft.com/en-us/windows/forum/windows_vista-hardware/hp-laserjet-1320-flashing-orange-light-fails-to/7b18b75b-6675-e011-8dfc-68b599b31bf5
https://www.experts-exchange.com/questions/22674000/HP-Laserjet-1320-Attention-light-will-not-stop-blinking.html
HP LaserJet 1320

check paper jams, open back over check paper path sensor flag and cartridge sensor flag for dislocation or spring mis place..

Hi office290
Deleting and reinstalling driver should solve your issue .
Best regards ,
fanaudi

There is a small sensor (usually a "finger" and a "socket") that senses when no paper is inserted.
Obviously, the sensor is giving the wrong "status" to the printer.
It could be clogged with paper-dust, or the finger could be jammed, so that it does not move.

Hello, this error means:
Paper tray is empty
Door open
Paper jam
Misfeed from tray
Good luck!

chek inside printer for pieces of paper or something...try to clear paper feeders...Good luck

Try unplugging the power cord and plugging it back in. Check to make sure that there are no paper jams or foreign objects stuck in the rollers. Reseat the toner and make sure the lid is firmly closed.

Hi there,
You may have paper jam ( small piece ), or Hanged sensor leds.

Here is what HP has on the subject of the triangle light flashing:
1 - Attention Light 2 - Ready Light 3 - Go Light Figure 2: Printer light key 1 - Symbol for light off 2 - Symbol for light on 3 - Symbol for light blinking
Door open, media out, no print cartridge, or media jam

The printer is in an error state that requires operator intervention or help. Check the following:

• The print cartridge door is completely closed.
• Media is loaded.
• The print cartridge is correctly installed in the printer.
• There is no media jam.

Figure 8: Paper jam 13.JJ.NT JAM IN TRAY 1

13.JJ.NT JAM IN TRAY X

The Attention LED is blinking. Check paper loading then open and close top cover.

When there is a jam in tray 1, verify the paper is loaded correctly, open and close the top cover. Pressing GO is ignored.

When there is a jam in tray X, verify the paper is loaded correctly, open and close the top cover. Pressing GO is ignored. These are the error explanations for just the flashing triangle light, there are many more, but none for just the flashing triangle.

If the light pattern is different let me know (other lights on as well)
-Hope this helps.

take everything out and look at all the rollers and printer path and look in the back of the printer