Technics SH -8058

google SH-8057 manual


https://www.hifiengine.com/manual_library/technics/sh-8058.shtml

Did you have a look at this site,

Sony eSupport Manuals Specs Select Model

You'll need 4 connections total. On my integrated amp, I connected the four connections to all Line In and Line Out ports. And the other ends into the tape 2/EXTRA ports respectively.

hi,
Try this. You need 4 RCA setreo Chord for this.

1. connect the cd player out to the LINE input of Equlizer.
2. connect the Record out of equlizer to Tape's Record input.
3. connect the Play out of the Tape to the Play in of Equlizer.
4. connect the Line out of the Equlizer to the CD input of amp.


Always Select CD in the amp. And select between tape and CD in the Equlizer.
OK

the amp should have an in and out for the cassette player also,, so you would go from the Out on the receiver, to the in on the cassette,, and out of the cassette to the in on the receiver, I don't have nor can I locate that EQ , but basically,, you need to come out of the eq and back the same way you would a Cassette player,,

amp woould be SU-X520 D and record deck would've been SL-J110 R. I know this because i am selling my own, i am listing them on eBay right now.

Look for a pre-main coupler on the back of the amp. Remove the coupler and hook the eq in. Output to Input.

This was answered here: http://www.fixya.com/support/t1371668-having_hard_time_connecting_various

- OPTiC
http://www.djproaudio.com
http://www.repairny.com

Yes, it is a little tricky...

1) CD Changer (output) -> CD input on Amp

this is tricky... this will allow you to record to your tape deck, and control the sound via the EQ:
2) Tape Deck (tape out / recout) -> TAPE PLAYBACK on EQ
3) Tape RecOut on EQ -> Tape 1 Playback on Amp
4) Amp Tape 1 RecOut -> Tape Deck Playback / Input / RecIn
in essence, your creating a loop starting from the tape deck, going to the eq, then to the amp, then back to the tape deck to record.

Your EQ has another set of LINE IN and LINE OUT - use the second Tape 2 on the amp to create another loop. This will
allow you to control the EQ for any of the other sources.
5) LINE IN on EQ -> Tape 2 RecOut
6) Tape 2 Playback on Amp -> LINE OUT on EQ

5) Radio Tuner (output) -> Tuner input on Amp
6) DVD/VCR Combo Output -> AV/AUX on Amp

7) PC Computer... you don't have room for this. You can either use the PHONO input, and you'll have to purchase a Line Level Phono Converter
or, get a Y cable and split the signal and share with some other source.

Hope this helps.

- OPTiC
www.djproaudio.com
www.repairny.com

connect your media source(dvd-cd player)to equalizer in-connect equalizer out to amplifier line in-or aux in-connect amplifier out to your loudspeaker.