My cultery tray is broken and needs to be replaced. Where do I find a replacement?

First, remove the paper tray from your printer. On a Canon printer, this is done by pressing the release clips located on the right and left side of the paper tray. On an HP printer, press the release button to remove the paper tray. Once the paper tray is released, locate the broken paper tray clip. This clip is usually a plastic piece that is clipped onto the paper tray. Using a pair of needle nose pliers, carefully remove the broken clip from the paper tray. Once the broken clip is removed, carefully inspect the paper tray to make sure that the area where the clip was attached is clean and free of any debris. Next, locate a replacement paper tray clip. You can find these clips online, or at a local office supplies store. Using the same needle nose pliers, carefully attach the new clip to the paper tray. Make sure that it is securely attached to the paper tray. Finally, re-insert the paper tray into the printer following the same instructions used to remove it. Once the tray is inserted, test its functionality to ensure that the new clip is securely in place.

the complete ice maker will need to be removed from freezer because the thermistor comes on the new tray that you will replace.

if i am getting your problem right then i think you should use a tape or paper-gum for temporary basis and u'll need to replace it at the nearby showroom

If the printer is covered by warranty, call HP.
I'm assuming that you mean tray 2. If so Google the
part number (RM1-2705-000CN).

you will have to replace the all tray. the part number is: LM6331001

If you will contact Customer Service at 800-263-2256 with the model and date code, they will be happy to help you. The tray assembling itself is not replaceable but the machine does carry a 3 year warranty.

Part number 5303282018 runs about $20 in the U.S. 


http://www.bizrate.com/dish-washers/frigidaire-dishwasher-silverware-basket/

sc 502 is the problem related to tray lift motor .open the backside of the machine ,almost downside u ll find one spring broken .replace tat the tray will start working.