At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Hi, i have forgot my mobile possword, now when i turn on my mobile, it asks for code but i can't get throgh of it. hoe to remove the possword at mobile startup.
Open the panel and check if its anything you can do yourself - cleaning or reassembling. not much else ;]
Do a dry clean, you dont wan't any liquids around an open cellphone.
Good luck
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Sounds as if it won't reboot. Apart from the obvious like turning the power off and waiting, I can't think of much else to do. Have you checked to see if anything is fractionally loose? Is it covered by warranty? If so go back to the manufacturer.
hi if you forget the lock code try default codes like 0000 or 1234 to reset your mobile if dint help to reset your mobile visit theunlockarena.com here they provide reset codes for some nokia and alcatel mobile models .
Hi, yes you can. The pressure switch is just stuck open causing the unit not to fire up. Find the small inducer motor that should be running, if its not and you have the panel off, you have a switch for the panel to kill the power when you take it off. You will have to tape it down with duct tape to restore power.You will see a clear plastic air tube coming from the motor and goes to this pressure switch. Pressure from the motor is what opens and closes the switch. Unplug it at the motor and blow through it several times. You will hear it click. Do this back and forth and it will break it loose. This will solve the problem. Kill power to reset unit. Start it up and your done. If it continues to do this, get a new pressure switch at a appliance parts house. Let me know the out come and please be kind when you rate me as I know you will. Good Luck, Shastalaker7 A/C, Heating, & Refrigeration Contractor
Either you battery is dead or there is some problem with the battery power storage IC inside the phone.. All you can do is try replacing it with another another battery..A faulty battery can be identified with its bulged appearance..If that does not solve the problem you might need the help of an service centre..
At this point, I'd make sure the * # and Power keys are not depressed by any chance. Maybe they are stuck. I'm afraid it might be a hardware issue, the only suggestions I could make is to flash a monster-pack but this would most likely not work and will erase anything on the phone anyway.
If not, try using Flash & Backup 3.0.7 and see if it detects your phone. If it does, try backing up ur current software and then try to flash a compatible MP (Monster Pack) from http://www.modmymoto.com/forums/downloads.php?do=cat&id=142
Try that.
send it in for repair is you still have warranty.
If not you can purchase a power supply for about 40 bucks plus shipping and change it yourself (it is pretty easy). This will solve your problem if there is no lights whatsoever (not the green-yellow-red light).
If interested in a working power supply contact me at [email protected].
Thanks
yes if you have a software like tornado flasher you can do iy your self but if you don't have you go to the cellphone repaire shop to solve your problem. tnx that's my idea.
×