I have a LG revolution phone, and I tried plugging it into my USB port. It worked, it shows that my phone is charging but I tried to sync my music that was on my computer to my phone using windows media player and my device isn't showing up in windows media player. But it did last time and I synced a few songs to my phone. But it's not working this time. I even tapped on the 'Media sync' on my phone but it's still not showing my device. Please help?

SOURCE: Sansa M230 not seen in Explorer or Windows Media Player

We had the same problem with Windows XP. We found some help on the Sandisk web site. On the device go to the Settings menu, then USB. We changed from AutoDetect to MSC mode and everything is working again. Our computer saw all of the songs on our computer fine. Some of the old songs on the Sansa didn't show up on the detect list in Windows Media Player, but they were still on the device.

ThaMp3Doctor

• 8597 Answers
• Posted on Jun 23, 2008

SOURCE: My sandisk c240 charges when plugged in but fails to be recognized on the computer

There is quite possibly a problem with the USB cable or the USB port on the computer, but try this shortcut force to force the computer to recognize the Mp3 player: Try this: disconnect the player from the computer, turn it off, hold in the volume + button, and reconnect the player to the computer while holding the volume + button in. Keep holding the volume + button for an additional 5-50 seconds. Windows should eventually go into recovery mode and revive the player- it will pop up a window that says Found New Hardware Wizard

ThaMp3Doctor

• 8597 Answers
• Posted on Jun 23, 2008

SOURCE: Sansa C240 syncing problems

The songs are in the wrong format - read my 2-part article on song formats under my profile for more detailed info

short answer: convert the songs to Mp3 format, and you will have no problems

SOURCE: Computer doesn't recognize MP3 player -

I had the same problem, all you have to do is first turn on the Mp3.Then go to settings. Then go down to USB mode. It will probably say, auto detect.But instead scroll down to MSC. If that doesn't work try MTP.

SOURCE: Computer doesn't recognize MP3 player -

What I would recommend you to do is to make sure that your device is under MTP mode instead of MSC...to do that go under menu,setting, usb and then there should the two mode listed there...then you want to plug your device in the back of your computer..not in the front..tghat is very important....once you do that..open up your windows media player...click on your start thee sync panel..if your device is recognize properly it will be showing there on the right side..and if its not listed properly, it will say connect a device..if thats the case..click on your start menu right click on computer and then click on propetties, click under hardware and then device manager..your device should be showing there...check under disk drives to see if your device is showing there and if it doesnt you want to right click and hit uninstall...we dont want your device to be under disk drive ..we want it to be under windows portable device...once you uninstall it...go to http://www.sandisk.com/DriverDownload/index.asp and find the driver for your device..and then connecct the device on the back of your computer...it should work properly..if you are still having any problems..let me know..i would be more than happy to assist you..
Please rate accordingly
Thank you
Computerrep