CDJ powers up but doesn't read discs. Display shows '0's as if no CD is inserted.

Hi,

This is more than likely a laser issue. Does it spin the disc up? The first thing the CDJ will do when you put a disc in, is look for a reflection of the laser, which tells it that there is a disc inserted. There should be a short pause whilst it does this, before it fails and spits the disc back out again. If this is the case, there is either dirt and grime on the laser lens, or the laser needs to be replaced. Normally I recommend replacing the traverse mechanism, which includes the spindle motor and laser assembly.

If this needs to be replaced, either ask for more help, or contact your local Pioneer Service Agent.

Hope this helps :)

Jaye

have you got an manual for it if so look up the error message and see what it says E-9103 and E-7201 it will tell you what to do

this error is for Mechanical time out. Disc inserted cant be read in given time. There may be dust or other particles in compartment of CDJ. Please make sure if you can open it yourself and clean the compartment.

Thx,

djajay

hi 9101 is mechanical time out error. When u insert disc to ur CDJ
and that is not able to read disc within the given time then
error 9101 display.

Please try to clean laser and compartment of your CDJ, their may be dirt, dust inside it. I hope this will help.

thx

djajay

Hello frnd,

Please explain your problem completely. like, when u insert disc, what error you get. Does your player show any error or just eject the disc.

Djajay

[email protected]

Sometimes so CD does not play in certain CDJ, i have 2 or 3 disc which
does not play or eject when i try to play in CDJ 100s but when i play them
in another player they go well.

Pls try to have some other brand disc or you may clean compartment of the CDJ their may be dirt inside CDJ. I hope this will help.

thx,

djajay

Hi, the optical lens assembly has failed. this is triggering the (no disc) error code. you will need to replace this failed optical assembly.

Hi, try cleaning the lens with a cleansing disk. if this doesn't produce results, it will confirm a major issue within the lens assembly. you will need to replace the lens assembly in this case. it is unable to track or read in this damaged sate.

hey,

also mention how old are ur CDJ and does it play original cds. Did you get any error code.

thx

djajay

Any error codes??? you must provide some more info... is the screen blank? When you are trying to insert a cd do you hear any noise from the mechanism?