Setup problem when install Wireless-G my desktop restart gain and again.my pc is hp-p4 and i'm using xp-sp2

Hi, you can download the driver here:

http://support.asus.com/Download.aspx?SLanguage=en&m=Terminator+P4+533A&p=8&os=

Please select your windows version.
Select audio and click on global for download.
Unzip the file before installation.

You have SP3 and HD audio give this a try:

This patch is required before any of the HD device drivers are installed
1. On your PC change the CSDVersion registry key to XP SP2:
HKLM\SYSTEM\CurrentControlSet\Control\Windows\CSDVersion value=200
2. Restart your PC
3. Install KB888111xpsp2.exeHD_Audio/kb888111xpsp2.exe and your audio driver.
4. Change the CSDVersion key back to XP SP3 again:
HKLM\SYSTEM\CurrentControlSet\Control\Windows\CSDVersion value=300
5. Restart your PC, finalize configuration of your PC, sysprep and capture.

Simplified Directions
Goto Start>Run and type in regedit , then click OK.
Click the plus signs in front of HKEY_LOCAL_MACHINE, SYSTEM, Current Control Set, Control, and finally, click Windows.
In the right panel you will see CSDVersion.
Right click it, choose Modify.
In the highlighted input window, you should see 300. Change it to 200.
Click OK, close regedit and restart your PC. Windows will now think it is SP2 and allow you to install the UAA and your HD audio driver.
Make sure to reboot and then test your sound BEFORE, changing the value back to 300.

Then follow the same steps to change it back to SP3. Change the 200 back to 300.

Run a HDD Test

Restart Computer -> Immediately keep tapping F10 Key which is on 1st row of Keyboard

Go to diagnostics with your arrow keys

Go to Primary HDD Test -> Press Enter ->

See the Test result

If Fail then Contact HP for Replacement of HDD or Service

1. Try deleting Cookies, Temp Files and restart computer
2. Download the files again and try installing it.
3. Still Same Issue, try different browser.
4. Still no Luck, Restart computer in safe mode with networking and download the software again.
Good Luck

First of all: If you install SP2 you don't have to install SP1 over it. It already did. Secondly, don't install SP3, it destroys Windows XP.
Try reinsalling the PC with SP2, install the drivers and do nothing else, see if that helps.

If not, by all means post back here,
Yannick.

check the cpu fan or remove it then put it again

Kindly get me the drivers as i have installed xp in my compaq system. and i want drivers for that

hai, Harish
your problem seems not BIOS related.
The problem is that some of your installation is not completed.
If you have the XP CD, insert it and complete the installation.

For changing the BIOS setup, just after switching on the computer, press DEL or F2 (refer motherboard manual for the correct key) to start the BIOS utility program to start.
Be careful before changing anithing in the BIOS.
Rabby

The other xp installer is not a bootable cd\dvd.

Get into the bios setup at start screen. Put as a first boot your cd/dvd rom. save and exit/restart. Get the xp SP2 and download avast antivirus. The first thing you have to do before browsing anywhere else. EXECUTE THE SETUP, install, RESTART and have fun..