Prestige induction cooktop showing E3 error when we use it with , what is the cause and it's solution?

Rohit, this is a generic fault code for induction cook tops, I am assuming this is the same for your Prestige unit.

1. For error code E9 or E09 on an Induction Cooktop, disconnect power for 10 seconds.
2. Turn back on again then retest the unit operation.

If these steps do not resolve the issue, you will need to contact an authorized service shop.

Rohit, this is a generic fault code for induction cook tops, I am assuming this is the same for your Prestige unit.

1. For error code E9 or E09 on an Induction Cooktop, disconnect power for 10 seconds.
2. Turn back on again then retest the unit operation.

If these steps do not resolve the issue, you will need to contact an authorized service shop.

Tthis is a generic fault code for induction cook tops, I am assuming this is the same for your Prestige unit.

1. For error code E9 or E09 on an Induction Cooktop, disconnect power for 10 seconds.
2. Turn back on again then retest the unit operation.

If these steps do not resolve the issue, you will need to contact an authorized service shop.

That error means the voltage sensor has detected higher voltage then should be present. This means power supply is bad.

Good Afternoon friend, I appreciate your inquiry!

Typically on an Electrolux induction cooktop the "E4" error code stands for key sensor for timer. Which means you could be experiencing an issue with the right board, center board, or left board. I would perform a reset on your cooktop and you can do that by flipping the household circuit breaker off for ten minutes.

If that does not assist with clearing any false error codes or the error "E4" continues to display I would suggest seeking assistance from a professional for proper diagnosis and repair. Hopefully this helps. -Matt

p1 beep sound

prestige induction cooker showing error p with beep sound problem solution

E7 error code definition: "Internal Electronic Temperature sensor is opening circuit or short circuit"Solution: Contact technical supportSource: Induction Cooker Error Codes Explained

e 3 is error because of high voltage may be more than 30 kW at your house......it will not work with it u have to buy a voltage regulator for it........