Dishwasher stops after filling

SOURCE: Kenmore Ultra Wash Dishwasher wiring diagram

if unavailable on line, contact mfg's parts and you should be able to order it.
also, they likely do not make the unit. the sears may be able to tell you who made it. that company would be able to get you a diagram. just make some phone calls.

SOURCE: Kenmore Ultra Wash III Dishwasher will not drain properly

From the sound of things, your dishwasher drains faster than your sink drain ( via the garbage disposal) can drain it off.. You may have a problem with the way your sink drain/trap is vented and there is too much back pressure to drain down quickly.. When you run water from your sink, does it take a long time to drain down or if you fill your sink up and drain it, does it drain slowly ? That may be your problem.. Hope that helps.

SOURCE: Kenmore ultra wash dishwasher control lock light flashing

Hi jabberr216,

I'm Harvey the Master Plumber.

Your question is: You have an older model Kenmore ultra wash dishwasher model #15805890. The control lock light is flashing. No buttons are working. The dishwasher does not turn on. Any solutions?

Sure! Someone must have activated the lock. It is next to either the 'air dry' or 'heated dry' button.
Press and hold that button till the lock light goes out. About 6 seconds. That's it. It turns on the same way.

Feel free contact me again!
Please give me a rating here at fixya.com before you sign off
Thank you,
Harvey your Master Plumber

SOURCE: Kenmore Ultra Wash III Dishwasher will not drain properly

Fixerfailure, is the knock-out plug still inside if the garbage disposal inlet?

Stick a screwdriver in there to make sure.

spazmo1969, could be the rubber flapper is broken off in the pump discharge outlet.

SOURCE: decible level for a Kenmore model 16625691 ultra dishwasher

HI,

ACCORDING TO SEARS TECH SERVICE THE AVERAGE DECIBLE READING IS 53.5 DECIBELS


HOPE THIS HELPS. THIS IS ONE OF THE QUIETEST MODELS IN THE CLASS OFFERED BY SEARS.