At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
How do i stop the shelves in my Thetford N112 caravan fridge from jumping out of their slots, when i'm travelling? Yes! i have attached the shelf clips correctly. I'm using a washing peg to hold clips in place at the moment!!
Re: How do i stop the shelves in my Thetford N112 caravan...
I don't have a Thetford but my Dometic used to do that also. I went to the hardward store and bought velcro stick ons and that has worked great from me, even on some of the rough roads.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
If it doesn't light, the LED flashes and the display shows an error code 9 which suggests a problem with the gas. The gas has been checked and the pressure is fine (I've also tried in on a different gas bottle).
https://www.caravantalk.co.uk/community/topic/35853-thetford-fridge-n112-problem-fault-code-9/
simple answer. Little resetable fuse on power board, F5 as i remember. It causes the display board to go insane as it doesn't provide enough power to the board. Solder a 2amp one across it. I nicked one from an old computer motherboard USB fuse(usually mounted next to each usb socket). SORTED! was an issue with 2007/8 fridges, especially if you had solar panels fitted tgo your caravan!!!! :)
un plug the heating element from the circuit board and ohm it out. also check fuse on board. but sounds like the heating element has gone out. if when you ohm it its on 0 its bad
There is a very likely possibility that the resistance heater for the 12 Volt side of the operation is open. This heater can be checked for continuity using an OHM meter from the terminals for the 12 volt .
×