What OS does the DiMAGE A2 support? - Konica Minolta DiMAGE A200 Digital Camera

Good Afternoon,
Because Konica Minolta no longer exists in the photographic industry, many of their support channels have been filtered over to Sony Corporation, who was the purchasing agent of their photography division.
Below is a link to where you can download an English manual for your DiMage A2:
http://ca.konicaminolta.com/support/manuals/digital_cameras/dimage-a/index.html
And the one you want can be followed to this link:
http://ca.konicaminolta.com/support/manuals/digital_cameras/dimage-a/dimage_a2/D_A2_E.pdf
or you can simply click on it from the first URL provided.
Hope this helps!
Lompanow

Windows XP (Home Edition, Professional), Windows Me, Windows 2000 Professional, Windows 98, or Windows 98 Second Edition, Mac OS 9.0 to 9.2.2, and Mac OS X (v10.1.3-10.1.5, v10.2.1-10.2.8, v10.3-10.3.5)

The DiMAGE A2 sensitivity can be set to Auto, ISO 64, 100, 200, 400, and 800. When Auto is selected, the camera automatically controls the sensitivity within the range of ISO 64-200.

Yes, it is possible to control the camera from PC with "DiMAGE Capture DCA200". (sold separately) It is necessary to update the camera's firmware to use with the DiMAGE Capture. (the firmware is included in the CD-ROM attached with the product.) * DiMAGE Capture DCA-200 will be available at the end of March, 2004.

This software enables operation of this model, capturing and saving images to connected PC, via the PC. Most of the functions of the camera is available through PC, furthermore, a focus point and/or achromatic point for White Balance adjustment can be designated through the PC monitor in advance of capturing images. *Not available with Macintosh PCs. PC: IBM PC /AT compatible CPU: Pentium III 600MHz or higher (must meet the recommended OS requirements) OS: Windows XP (Home Edition, Professional), Windows, Windows 2000 Professional RAM : 128MB or more (must meet the recommended OS requirements) HDD : 200MB or more must be free after installation Monitor: 1024x768 dot or higher (necessary), 24-bit color depth or greater. Other: USB Interface * DiMAGE Capture DCA-200 will be available at the end of March, 200

The firmware for telephoto-converter/ wide-converter is included in the attached CD-ROM. Please update it if you have DiMAGE series 7i to A1. Please confirm the firmware version and update it if you have DiMAGE A2 and its version is 1.10. * Tele Converter ACT-100 and Wide Converter ACW-100 will be available at the end of March, 2004.

Yes. The LCD monitor on the DiMAGE A2 can tilt to 20 degrees downward 90 degrees upward.

It's immaterial as the supplied software is poorly executed and completely unnecessary.
Just use whatever photo album software and editing package you're happy with and transfer the images from the camera using a cheap and readily available CF card reader. You'll also find that this results in far quicker uploads to your Mac/pc as well.

The DiMAGE A2 has a 46mm (1.8 inch) low-temperature polysilicon TFT color LCD Monitor, which displays approximately 118,000 pixels. This LCD monitor is tiltable (20 deg. downward and 90 deg. upward).

The use of electronic transformers or travel adapters with this model via AC adapter or with the battery charger may cause damage to the product. Under these circumstances, we would recommend using the AC Cord which matches with voltage level of the country.