F 11 ERROR IN A WHITE RANGE (FRIGIDAIRE )_
WHAT TO DO ,
Hi Ken Kazemi - Typically error code F11 indicates a shorted keypad. Try resetting the range by unplugging it or flipping the household circuit breaker off. This usually will clear most false error codes. Wait approximately ten minutes and if it proves to be ineffective contact a professional to move forward accurately. Most likely the EOC on the range will need replacing.
Hi - Typically error code F93 indicates a communication problem with the console control. Since you have already try to reset the unit and unfortunately it was not successful, I would suggest contacting a professional to move forward and replace the main control board.
1,389 views
Usually answered in minutes!
My problem is almost the same, it shows F1 and it's keeping BEEPING. I tried to on and of it from the circuit breaker but after a minute its start beeping again. BUT, the 4 burners are working except for the oven because all buttons are frozen.
My Frigidaire oven had a F1 error code and I replaced the EOC as per repair forums. Now it is beeping again and showing the F11 error code. The online forums suggest replacing the EOC when the F11 error code appears. I've done that and need to know what step is next.
Thanks, Brian
i have the same probleme f11 showing i disconnected the oven for a full night periode but in the morning when i plugged it back on started bipping again. what is the EOC exactly?
i get the same issue but i've noticed the broiler heating element (on top) comes on instead of the oven (on bottom)....any ideas what to do about that? everything else seems to work fine.
i have the same problem...the broiler elemnt (top) comes on instead of the oven (bottom) when i hit bake...everything else is fine....don't know what to do....sometimes the bottom one comes on but it will switch to the broiler when the temperature has to readjust and then it burns everything
I have had the same problem for the last 5 days. Getting the F11 beeping noise and I shut the stove off and tried resetting it. Is there a option to reset the stove or program functions.
×