How do I get the meter reading for my copystar c1820?

http://www.omnifix.com/cs3035meter.htm

my dear you press meter counter baten

Hold down clear/stop button.

Transfer belt unit EEPROM error No response is issued from the device in reading/writing for 5 ms or more and this problem is repeated five times successively. Mismatch of reading data from two locations occurs eight times successively.

Mismatch between writing data and reading data occurs eight times successively

1. Poor contact in the connector terminals.

- Check the connection of connector YC28 on the engine PWB and the connector of the transfer belt unit, and the continuity across the connector terminals. Repair or replace if necessary.

2. Defective transfer belt speed PWB (inner transfer belt unit).

- Replace the transfer belt unit.

I hope this is helpful,

Shawn

Press and hold stop button the take the reading

hold down the STOP key for ten seconds and record the reading appearing on the display

Okay, please reread your question because as I read it, it makes no sense to me.

Who tells it to form for stamp and what does that mean? Does the printer have a font or application that will print postage on the envelope?

when machine is on hold down stop key, start, left exposure. release them and press start. display will show U000. self status. key in 163 and press start twice

press down the stop button for five second the reading on the display is the meter reading

9 times out of 10 when a copier is printing light it is NOT the toner.
when the toner is low the machine will display a message.

can you tell me how many pages this machine has done?
(hold the stop button to get a meter reading)