I have the 300 watt hand mixer and the retreactable cord no longer holdes when pluged in. It's been broken for some time. Is there a fix to this problem.

-Broken cord. Need to replace new cord, you should be good to go.


Good Luck


mai

Mrs. Judd, it might be very hard to find such parts because a new mixer is very cheap. Time to change!

Are you using the white coated beaters or the burnished beaters. If they are the white coated beaters then the finish has come off and the zinc/underneath is rubbing off. Are you using the aluminum looking beaters in heavy acidic applications? if the mixer is new go to kitchaid customer support they will re-place. if your mixer is out of warranty then you need to replace it. about 15.00 t0 24.00 USD. if the problem persists then you may be leaking metal shavings from the planetary head, (I don't think it is happening but it is a possibility) if it is ground metal shavings you have a serious problem. I can't say anymore without knowing more. What application are you getting this result. is it all the time. is it after the mixer sits along time. need more info.

HI.This steps might be as well helpful.let me just clarify that you can't even manually twist the shafting.If the motor is working an yet it will not turn the shaft.Tha shafting bossing might as well been broken misallign inside..Better remove the cover by unscrewing it and then try to observe how the motor works.If it really does turn when ever it is plugg on to the source.Observe also misallign bosssing that connects the shafting and the motor's rotor.Thank you for choosing FIXYA.

http://www.service.braun.com/line/HH/H4179/H4179_6_KOR.pdf

english on the last pages

MarBeck.com has what you need

The cord has twisted inside the housing and is now binding or it has slipped out ofthe housing and is wedged between the cord housing and the case. If it is still within warranty, send it in, if not, you'll need to carefully open the housing to get the cord into the cord housing.

Bravetti Mixer Beaters 10+ Bravetti Products Shop, Compare and Save at Pronto.Bravetti.Pronto.com

Sometimes there are hidden areas under the products name plates where they need to be gently pryed off and other times usually in the least exspensive types they are just snap fitted together and you will need to gently pry apart at the seams!!