My pc acer aspire m1201 has no display on monitor after acer logo. need urgent asst.

Acer monitors all display the ACER logo when you turn them on. There are one of three most likely issues with the system.

1. If the monitor has multiple input jacks (VGA/DVI), check to be sure that the monitor is selecting the input that you have the computer connected to. One of the control buttons on the monitor should select input source.
2. If #1 is not the problem, the monitor itself may be faulty. The input jack may not be working. Test the system with another monitor if possible.
3. If another monitor doesn't work either, then you have a problem with the on-board graphics adapter for the computer. You will either need to replace the computer, or if possible, install a graphics card into the machine to take over for the failed portion of the motherboard.

MEMORYPROBLEM.TWO BEEPS MEANS THE MEMORY.
TROUBLESHOOT IF A UPGRADE REASONLY CAN BE THAT. TRY CHANGE PLACE OF MEMORYSTICKS 1-4 3-2.IF NOT AN UPGRADE JUST BAD MEMORY,IT'S CAN HAPPEN THEN REPLACE MEMORY

https://www.manualslib.com/products/Acer-Aspire-M1201-2177911.html

Hi,

If you are seeing the Acer logo on boot up then the machine is working. The problem will be your graphics drivers being corrupt.
Try starting the machine in Safe Mode. To do this repeatedly tap the F8 key as it's just starting up. It should take you to an advanced menu with Safe Mode at the top, select that with the cursor keys.

If it allows you to boot in safe mode then wait until Windows loads and then right click on My Computer/Computer, select manage from the sub menu and then Device Manager.

Click on Display Adapters and uninstall the drivers. When its done unistalling the drivers restart the machine in normal mode. It should boot into Windows. If it lets you boot into Windows I suggest that you download and install the latest drivers from Acer's support website.

If you need anymore help please post back.

Good luck and regards.

Have you tried connecting an external monitor and see if that one would work? Also, are you hearing any startup sound when you turn on the computer? If there is, and there is a good display on an external monitor, then it is the LCD that is causing the problem.

Please go thru this link to find the manual.

http://support.acer.com/us/en/acerpanam/desktop/0000/Acer/AspireM1200/AspireM1200nv.shtml?Team=%2Fus%2Fen%2Facerpanam%2Fdesktop%2F0000%2FAcer%2FAspireM1200%2FAspireM1200nv.shtml

after press power botton fress F8 key for a while , u have got some msg the. just select "last known good configuraion " press enter again enter run your system and watch what is going. if the same problem then you need your install you OS again.

based on the images i've looked on for the Aspire m1201, you don't need to remove the front panel in order to remove the optical drive. if there are screws holding the drive in, remove them and then slide the drive forward. if its held in by sliding latches and not screws, then slide then in which ever direction necessary and then push the drive forward to take it out.

Downloa here

http://support.acer-euro.com/drivers/downloads.html

http://www.acer.com/worldwide/support/download.htm

http://203.150.225.245/UpAndDownLoad%201/PC/drivers/Aspire%20M1200,M1201,M3200,M3210,M5200,M5201/WLAN.zip

Wireless Lan Driver, if that what you are looking for.. or...

http://komku.blogspot.com/2008/12/aspire-m1200-m1201-m3200-m3201-m5200.html

Just scroll down for a list of drivers for that Acer.....

hope this helps! :)