What is the proper setting for Danby R410A? - Danby DDR4588EE Dehumidifier

try looking here and using a search engine next time.
https://www.manualslib.com/brand/danby/dehumidifier.html

Google.com shows a number of different equipment itmes named r410a.

Could it be Danby or DCA or Whynter?

https://images.homedepot-static.com/catalog/pdfimages/fa/fad30f55-13e9-4044-97ce-8d4a36f4dc16.pdf

https://www.epatest.com/R410A/manual/manual.jsp

http://www.danby.com/en/US/our_products/dehumidifiers/list?f1=8 Dehumidifiers Large Dehumidifiers

Hi There,
I would love to help you, however I am not sure which model you have. R410A is not a Danby model number. The correct number can be found on the back of the unit as well as on the front cover of the owners manual. The numbers usually begin with "DDR"

I have 70 pint premiere dehumidifier , and it's not producing any water . What should I do ?

The manual for the Delonghi dd50p is available from Sylvane on the product page (under Manufacturer Info): http://www.sylvane.com/delonghi-dd50p-dehumidifier.html?PHPSESSID=0a124e4f809af8c3a1184075f3a697fe The direct link to the manual is: http://www.sylvane.com/images/prodphoto/de1780/delonghi-dd50p-dehumidifier-user-manual.pdf .

I hope this helps.

Cindy Wells

The compressor relay's purpose is to start the compressor. A faulty relay can result in the compressor failing to cycle on. The relay is accessed from the lower rear of the humidifier.

Before testing a compressor relay, unplug the refrigerator to avoid an electrical shock hazard. Also, if the compressor uses a capacitor, it must be discharged first to avoid the risk of electrical shock.

The compressor relay can be accessed by removing the terminal cover box. The cover is held on by tension or with a retaining clip.

On the control panel the 3rd button from the left is the timer button. If you press this button when the unit is running the number display on the left will start blinking- use the up/down arrows to set the time that you want the unit to run.
If you press the timer button when the unit is off it will run on and off for the designated time you set- eg if you set 1 then every 1 hour the machine will switch on and run for 1 hour.
(The left # will just blink once you have the time you want just leave it and eventually the normal humidity setting reading will show)

Use a piece of ethernet cable and carefully push it through the water discharge area's...This should free up the grime that's clogging the drainage holes.