Tip & How-To about Belkin F8T030 Bluetooth Access Point w/ USB Print (814227018805)
This worked for me...
Install Printer Driver on PC
Select driver properties - then PORTS tab
Select "Standard TCP/IP Port" then "New Port"
Next on Wizard
Enter IP address of AP (ensure you have a fixed IP address)
Port name can be anything unique (I used "Belkin_USB2")
Wizard will search but not find anything.
Under Device Type select Custom and "Settings")
Set Protocol to LPR
Set Queue Name to "upper" or "lower" depending which USB socket you have used on the AP
Ensure "LPR Byte Counting" is enabled - this is important.
NEXT then FINISH and Close "Printer Ports" dialogue.
Apply settings and try test print.
Worked ok for me (Vista Ultimate 64)
Posted by Anonymous on
May 03, 2010 | Konica Minolta bizhub 350 All-In-One Laser...
Feb 06, 2010 | NetGear WGPS606 (WGPS606NAR) Print Server
Oct 05, 2009 | Konica Minolta bizhub 350 All-In-One Laser...
Jan 22, 2009 | Linksys Wireless-G WPS54GU2 Print Server
806 people viewed this tip
Usually answered in minutes!