20 Most Recent
AT&T 650530003417 Cordless Phone - Page 2 Questions & Answers
Had a bad electrical storm.
The damage is not to the phone line it is to the phones. Unfortunately this is very common with powered phones as they are almost never kept on surge protectors and are very fragile. You will need to purchase a new base station to use with existing phones.
5/5/2011 4:28:01 AM •
AT&T...
•
Answered
on May 05, 2011
Phone is not working
Unplug
your Phone and plug in a regular un-powered phone. If
it rings your cordless base station is bad and you will need a new one
if it does not ring then there is a problem on your phone line and you
need to contact your phone company. Note, the phone company will charge
you for repairs inside your house.
5/4/2011 3:21:15 AM •
AT&T...
•
Answered
on May 04, 2011
I have a AT&T model
Hi,
You can try reset your phone,
Turn
off the phone, remove the AC adapter, press and hold the page/call
button that is on the phone and plug back your Ac adapter, see if this fix the problem.
3/14/2011 5:42:40 AM •
AT&T...
•
Answered
on Mar 14, 2011
My cordless phone's "you have
power off base, unplug it from wall power and wait for about 1 hour. this should reset it and clear that false alert of voice message. you may post back for a followup
1/3/2011 12:26:53 PM •
AT&T...
•
Answered
on Jan 03, 2011
My neighbors AT&T cordless phone with two
If the other phone works fine, then it's probably the base of your neighbor's phone that is the problem, that's why neither handset will work when placed on the base. If you can take the base apart, you can blow some compressed air into it to remove any dust buildup, and check to make sure all of the connections are secure.
If the phone still won't work, do the lights come on to let you know the handsets are charging when you place them on the base
8/22/2010 10:18:39 PM •
AT&T...
•
Answered
on Aug 22, 2010
My cordless phones crackle
Do you know what frequency the phones operate on? Many devices can interfere with cordless phone signals, including wireless routers, Bluetooth devices, and even microwaves.
Try moving the phones away from any of these devices and see if that helps. If you use DSL for your Internet service, make sure you have placed filters on all of the phone lines that don't go to the DSL modem.
8/22/2010 10:15:10 PM •
AT&T...
•
Answered
on Aug 22, 2010
Our system E5947B has 4 phones - three of which
try removing the batteries from all of the hand sets.wait 30-60 seconds. 1 by 1 replace the batteries and place them on the main base. this will re-register the phones 1,2,3 etc. as you plug them into the base, they will be numbered sequentially
4/12/2010 1:00:18 PM •
AT&T...
•
Answered
on Apr 12, 2010
Not finding what you are looking for?