JUMP START SYSTEM - Answered Questions & Fixed issues

To find parts for your Vector 350, 200 wt veco29acy, you have a few options:

1. Manufacturer: Start by contacting the manufacturer of the Vector 350 equipment. They may offer replacement parts or direct you to authorized dealers or distributors who can provide the parts you need. You can check the manufacturer's website for contact information or support resources.
2. Authorized Dealers or Distributors: Search for authorized dealers or distributors of Vector 350 equipment in your area or online. These dealers may stock replacement parts for the specific model you have and can assist you in purchasing the parts you need.
3. Online Marketplaces: Explore online marketplaces such as eBay, Amazon, or specialized industrial equipment marketplaces. Sellers on these platforms may offer replacement parts for Vector 350 equipment, including the specific model you have. Be sure to verify the compatibility of the parts with your equipment before making a purchase.
4. Equipment Repair Shops: Local equipment repair shops or service centers that specialize in food equipment may have access to or be able to source the parts you need. Contact them and inquire about their ability to provide replacement parts for your Vector 350 equipment.

When searching for parts, make sure to provide as much detail about your equipment, including the model number (Veco29acy) and any specific part numbers or descriptions if available. This will help ensure that you get the correct parts for your equipment.

hello u will find a lot of wiring diagrams, codes etc and circuit diagrams help books and stuff like this at online places.. like reliable-store for free the girl in the chat box can help u instantly... im a frequent buyer there since Im a mechanic so take help from there

Hi there's this website something like reliable-store and it is very amazing for manual for repairing servicing anything someone on fixya recommended it to me and I thank him even today They have full manuals free

I cannot see the manufacturers name. If you get me the manufacturers name and the model number then I'll be able to find out where you can get the power cord.

How old is the starter pack? The battery(ies) die after 3-5 years. FWIW I replaced an AGM-type battery in a starter pack and found out later it was almost as expensive as buying a new one from COSTCO or Uncle Sam's. Sounds like you're in Oz so COSTCO might not be available.

Not to my knowledge, usually the charging fuse will be a low value in relation to the voltage output and the wattage. Maximum would be 10amps or so and the unit would charge all night to come up to charge.

Contact Black and Decker at 1 (800) 231-9786

https://www.savingology.com/ProductDetails.asp?ProductCode=Black-VEC012BD-VEC012C-AC-EGR&click=2&gclid=CJXoxsmemc0CFZA2aQodCwEGXw

Battery could be bad. A bad battery can sometimes show a surface charge (voltage) on monitoring system, but when you go to use it nada happens because it has no current.

Here's a link to the power charger I needed, its a Black & Decker Replacement A/C Charger. I ordered it at the following: http://www.amazon.com/Black-Decker-5140045-42-Replacement-Charger/dp/B002V6VIZW/ref=sr_1_1?s=hi&ie=UTF8&qid=1445366598&sr=1-1&keywords=Black+%26+Decker+%235140045-42+Replacement+A%2FC+Charger

yes, assuming you use the correct adapter.

You can but it will shorten the battery life.

What kind of battery are you asking for? Get yourself a good battery charger and follow the directions found in the box. It will explain everything you need to do.

battery plus or e-bay better price

This unit contains a sealed lead acid battery. As such it is necessary to maintain the battery much as you would an RV or tractor or other occasional use battery. If you left the charger plugged in all the time, that's what killed the battery. If you charged it less than once every two or three months, that's what killed the battery. If you stored it in a cold place it may have sulfated. If you stored it in a hot place it may have dried out, especially while charging. The good news is that a replacement battery is not expensive and you can install it yourself. Pull the case apart (look for hidden screws). You may find a good YouTube video to help. Unplug the battery and either shop on-line or go to a battery plus store. But remember, the old SLA battery models like this are rapidly being replaced with LiPoly units that have very good latency (storage) without loss of power. You can get a good one for around $100.

You did not say what is wrong. Might need a new one.

Here is the link to the owner's manual. http://documents.dewalt.com/documents/English/Instruction%20Manual/Vector/TVEC012.pdf

yes there is but its very pricy,,,you may find its cheaper to buy a new jump start pack,,
as its broken you wont loos anything if you took the battery out and hooked it up to a small battery charger say 2amps and recharged it that way,,,,
at a C10 rate! ==20ah battery --2ah hour charge ==10hours to fully recharge the battery
i hope this helps you out,,,,

Good clamps are available from NAPA, Autozone, O'Reilly's, Pep Boys, Car Quest, and other suppliers. Check to see if the existing wire terminates in a crimped lug. If not you need to look at the new clamps to see whether they are designed for attaching directly to the wire strands or if they require the wires to be gathered and crimped into a lug to go under a single screw. Fasteners to clamp large wire under a screw are similar to photo here.