20 Most Recent Amerec 4.5KW Heater w/ Built-in Dial Controls, 100-210 ACF - Page 2 Questions & Answers

0helpful
1answer

My T19 Kingshield automatic timer is clicking on and off. Kindly advise how to stop this happening.

Contact them for a free replacement. But first press and hold the Reset Button on upper right. https://images-na.ssl-images-amazon.com/images/I/71OhENnuRdL.pdf ..
12/27/2023 12:32:02 AM • Hardware &... • Answered on Dec 27, 2023
0helpful
3answers

I just purchased two noma

I have just been dealing with the same model of timer. The instructions are a bit "opaque" on this point! There's a tiny button on the right-hand side labelled with an R (for Reset). With the timer plugged in to a live wall outlet, take a ball point pen and press that in for a couple of seconds. You should hear a click and the timer should then show something on the display. You can easily set it up from there following the instructions that came with it. Cheers!

be132100-9a64-4cb0-8a83-54f8a4b2e3ca.jpg
12/14/2023 2:44:11 AM • Hardware &... • Answered on Dec 14, 2023
0helpful
1answer

No output voltage on output of Defiant 49808 during programmed on time

$18 for a new one. They are fully electronic, the Triacs on the boards fail. https://www.google.com/search?q=Defiant+49808 ..
12/12/2023 5:31:01 AM • Hardware &... • Answered on Dec 12, 2023
0helpful
1answer

Wiring a bypass for a soft start on a Ridgid R4514 table saw

The wiring diagram is here. There is a part called 'soft start' and parts appear to be in stock. In fact all parts but one are in stock. START SOFT SKU TTI-089240020009 In Stock $67.95 https://ridgid.ordertree.com/catalog/partslist/view/group_id/467808/?assembly=WIRING%2BDIAGRAM&assembly_id=57257 https://www.google.com/search?q=Ridgid+R4514+parts ..
12/10/2023 4:29:40 AM • Hardware &... • Answered on Dec 10, 2023
0helpful
1answer

Timer turns off before the programmed setting

No make and model given, or what the timer is controlling, but there is generic timer advice here. https://www.google.com/search?q=Timer+turns+off+before+the+programmed+setting ..
12/9/2023 6:05:18 PM • Hardware &... • Answered on Dec 09, 2023
0helpful
2answers

I have lost the instructions for use of smiths plug in digital timer etu02

10-30-12Smith's ETU02 timer does not appear on the Smith's manual page:http://www.tlc-direct.co.uk/Technical/DataSheets/Smiths/Index.htmOther sites report this 7-day digital timer is discontinued, but can be replaced with similar timer from local box store locally.Another option is to search following page for same-similar timer that might yield a manual similar to your timer.http://waterheatertimer.org/Woods-timers-and-manuals.html#6-week If you need further help, I’m available over the phone at https://www.6ya.com/expert/gene_9f0ef4df2f9897e7
12/5/2023 5:53:34 PM • Hardware &... • Answered on Dec 05, 2023
0helpful
2answers

Adding hydrolic oil to yardworks 4-ton wood

Replace the Hydraulic oil in the log splitter after every 150 hours of use. Take following steps to replace it.
  1. Make sure all moving parts stops and the log splitter is unplugged.
  2. Unscrew Oil Drain Bolt with Dipstick to remove it.
  3. Turn the log splitter on the Support Leg side over an 4 liters capacity container to drain the hydraulic oil off.
  4. Turn the log splitter on the the motor side.
  5. Refill fresh hydraulic oil at the volume as per the hydraulic oil capacity of a particular model indicated in above specifications table.
  6. Clean the surface of Dipstick on the Oil Drain Bolt and put it back into the oil tank while keep the log splitter vertically.
  7. Make sure the level of the refilled oil is just between 2 grooves around the Dipstick.
  8. Clean the Oil Drain Bolt before thread them back. Make sure they are tightened to avoid leakage before place the log splitter horizontally.
Periodically check oil level to ensure it is between 2 grooves around the Dipstick. Upon Lower oil level, oil refilling is required. Source: http://www.qci.net/files/5_Ton_Log_Splitter_-_USE_THIS_MANUAL.pdf
12/4/2023 9:49:34 AM • Hardware &... • Answered on Dec 04, 2023
0helpful
1answer

How do I set it for 8 hours to go on @ 4:00PM? When I turn it to On lights go on but when i then switch it to 8 lights go off.

Christmas lights timer with a single button? The instructions are engraved into the back. It will go off and come back on after one full time cycle. You have to set it and then leave it alone. Don't set it in the dark (if it has a photocell) or after the time it is due to come on, so in other words don't set it at 6pm to come on at 4:00pm. All questions need 'make model (what it is)' first 3 words. ..
12/2/2023 8:33:34 PM • Hardware &... • Answered on Dec 02, 2023
0helpful
1answer

Noma timer model N1505

img_0770-u4hqttb4yrllmk1sw3b2xyuu-d-0.jpeg
12/1/2023 11:51:09 PM • Hardware &... • Answered on Dec 01, 2023
0helpful
2answers
0helpful
1answer

Installing outdoor light timer to old house wiring

How to Put Outdoor Lights On a Timer?

ElectronicsHub https://www.electronicshub.org > can-you-put-outdoor... Jul 30, 2022 - It is way simpler than you think. You first have to take off the older light bulbs from their place. Next, screw in the new smart bulbs in the ... ‎Outdoor Lighting Timers... · ‎Mechanical Outdoor Outlet Timer · ‎Smart Outdoor Lights

How to Install a Timer for Exterior Lights

Koopman Lumber https://koopmanlumber.com > how-to-install-a-timer-f... Once the wires are attached, place the timer into the wall box and set the flanges flush with the wall. Line up the screw holes and replace the terminal screws.

How to Install a Timer Switch in Outdoor Lighting

DoItYourself.com https://www.doityourself.com > stry > how-to-install-a... Aug 4, 2010 - Step 7 - Insert the Timer Switch in the Wall Box. Push the wires slowly into the box and insert the timer switch into the wall box as well.

Easy to Install Programmable Timer

The Lady DIY https://theladydiy.com > easy-install-programmable-ti... Feb 28, 2023 - An easy to install programmable timer that can replace any interior light switch. A great security update when used with your outdoor ...
11/11/2023 11:56:20 PM • Hardware &... • Answered on Nov 11, 2023
0helpful
1answer

Digital wall timer won't turn off red light stays illuminated

If your digital wall timer won't turn off, and the red light stays illuminated:Check the timer's programming for errors.Verify a steady power supply.Ensure the backup battery is working (if applicable).If the issue persists, consider contacting the manufacturer's support or a professional electrician for further diagnosis or replacement.
11/5/2023 4:05:13 PM • Hardware &... • Answered on Nov 05, 2023
0helpful
1answer

Why does my Hitachi PC-P1H keep turning on and how do I stop it

I found a manual for the Hitachi PC-P1HE which might be similar to your model. According to the manual, if the unit is turning on by itself, it could be due to a malfunctioning remote control or a timer setting. Here are some steps you can try to resolve the issue: Check if the remote control is malfunctioning by removing its batteries and see if the unit still turns on by itself. If the unit still turns on, check if there is a timer setting that is causing it to turn on automatically. You can refer to the manual for instructions on how to disable the timer setting. If none of these steps work, it might be best to contact your service contractor of HITACHI for further assistance
10/27/2023 10:44:33 PM • Hardware &... • Answered on Oct 27, 2023
0helpful
2answers

How to fix Melnor 65036 AMZ water timer with stuck valves please?

There is some help on this link. Others have the same issue with stuck open or stuck closed valves. https://www.google.com/search?q=melnor+65036+AMZ+timer+with+stuck+valves ..
10/21/2023 5:51:53 PM • Hardware &... • Answered on Oct 21, 2023
0helpful
1answer

How to program a digital timer to seconds?

Question edited for spelling and CAPS. I hope you aren't a teacher! Question moved from Cars and Trucks category. You will need a specially made school siren timer. Normal timer have a timer that can be set to the time accurate to a second, but the shortest On-Off cycle on a manual timer is 15 minutes and on a digital timer is one full minute (On at 12:15 - Off at 12:16). https://www.google.com/search?q=school+siren+timer ..
10/19/2023 3:51:15 PM • Hardware &... • Answered on Oct 19, 2023
0helpful
1answer

Universal of mich scoreboard clock shows only one number

Hello, Melvyn - If your University of Michigan Scoreboard Clock is an alarm clock, the instructions for the clock here may prove helpful: http://www.myevergreenonline.com/images/Document/0128_instruction.pdf The instructions do not mention a backup battery for the clock. However, just in case, check to determine if there is a battery compartment. If you find one, open it and install a fresh battery (or batteries.) The NCAA (team) Scoreboard Clocks are manufactured by Team Sports America which is a subsidiary of Evergreen Enterrprises. Best wishes.
10/17/2023 6:26:56 PM • Hardware &... • Answered on Oct 17, 2023
0helpful
1answer

What advantages do the ball door knobs offer for homeowners?

The ball door knobs offer several advantages for homeowners. They embody the elegance and durability of the Victorian era through their solid brass construction. The ball-shaped design seamlessly fits into traditional d?cor, enhancing the overall aesthetic of the door. https://infinitydecor.co.uk/product/ball-door-knob-polished-brass/
10/16/2023 10:11:03 AM • Hardware &... • Answered on Oct 16, 2023
0helpful
1answer

Westek TE06WHB only showing 888888 when pluged into wall outlet

According to the Westek TE06WHB User Manual, if the display does not appear, you should plug the unit into a wall receptacle and charge the battery for 1 hour. After that, remove the unit from the wall to begin programming. Press and hold the SET key for 3 seconds, then release. Press [+] or [-] keys to select current day. Press the SET key again until hour display flashes. Press the [+] or [-] key to select hour (AM or PM). Press the SET key again until minutes display flashes. Press [+] or [-] keys to select minutes. Press SET key.
10/15/2023 2:31:26 PM • Hardware &... • Answered on Oct 15, 2023
Not finding what you are looking for?
Amerec 4.5KW Heater w/ Built-in Dial Controls, 100-210 ACF Logo

1 questions posted

Ask a Question

Usually answered in minutes!

Top Amerec Hardware & Accessories Experts

Brad Brown

Level 3 Expert

19187 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66931 Answers

Steve Pack
Steve Pack

Level 3 Expert

7128 Answers

Are you an Amerec Hardware and Accessory Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Amerec Hardware & Accessories

  • Amerec Hardware & Accessories

Most Popular Question

sauna wont get hot enough

  • Hardware & Accessories
Loading...