20 Most Recent NorStar T7316E Corded Phone - Page 7 Questions & Answers

If you are talking about the button programming then look for Desktop Assistant 1.4 at www.avaya.com

T7316E does not work on a Panasonic system, use a Panasonic phone.

Call your office admin or local tech/vendor for assistance, they will get you a cheat sheet for voice mail admin.Or look for Norstar Setup and Operation Guide.

Press NextNext is the bottom key that is lit up on the right side.If old software 5th key down right side.

Call a tech in, name change will not harm a line period.

Call a tech in, no remote support for your issue.The carrier like Bell or AT&T handles dial tone going into the building, call them first.

You need software version 6.1 or above rod Distinctive Ring tone for lines. programming via Config/Lines/DataYou can setup night services for each company via Service Modes.Complex programming.best to call a vendor/tech in for this....roughly one hour call.

Try swapping curly cords with a known working one (borrow from another phone), if does not work then swap the handset, if still same issue have set repaired.

Log into the mailbox and check the setting via ADMIN or 8 then press 8 again to set it up.Make sure your cell # is in there and see that its told to grab the right line, pool or route. If all seems ok but still an issue then you need to call your vendor in to look at system/lines.

You get around the problem by unpluging the phone and taking it back to wherever you got it, or going out and buying a CICS, MICS, or BCM cabinet to plug the phone into.

A Multi-line digital phone doesn't operate on a POTS telephone line.

Carl

"I should have 1-6&none."How so?It all depends on your software release and system size/model.

Whom controls mailbox 102 has the password.102 = system manager mailbox 0000 = password.To reset it see/google the Norstar Setup and Operation Guide

General Mailbox is mailbox 100 and often behind reception (ex221)When you do change the name from GD make sure to do last name first and press # twice to insert comma then spell first name.

FEATURE * 0 then press Intercom to see the ext #You may need a tech involved.