20 Most Recent
NorStar T7316E Corded Phone - Page 3 Questions & Answers
Change date and time on nortel t7616e
That is a system setting... Depending on what KSU common equipment you have. Feature **TIME might do it, systems with Caller ID Cavan set the clock on an incoming call.
266344 nortel line
Hi Jo-Anne,
The easiest way to get the lines unlocked is to call your phone service provider and have them reset your lines. You should also go through all the extensions and ensure that Outdial is turned off in the voice mail admin settings. Lines often get locked up when there has been a system hack through Outdial.
How do I change the name on the display for the
To chane the name on the sets you'll need to enter telephone programming.
Programming is done on 7310, 7324 and 7316 type sets.
Enter programming by pressing the feature key followed by **266344.When prompted to enter the password enter 266344.
The screen should say TERMINALS&SETS. The 4 top line/feature keys are now used for programming.
At the terminals&sets prompt, press the show key (top right arrow).
The display should now ask for an extension number.
Enter extension number you want to change the name on.
Press the show key (top right arrow)
The display should say LINE ACCESS
Press the next key (bottom right arrow) .
The display should say CAPABILITIES.
Press the next key (bottom right arrow) .
The display say Name.
press the Chng soft key.
use the dial pad to enter the name. advance using the arrow soft key to go to the next letter
ex. Bill = 2,2 -> 4,4,4 -> 5,5,5 -> 5,5,5
Press the next key (bottom right arrow) to enter the name.
Press the release key when finished
Locked lines
do you have a land line or a mobile,it if is a land line phone
please chech from the place where you bought the phone
from probably they will be able to unlock if if is a mobile
phone take it to a service dealer and get it unlocked
T7316 phone does not cancel call forwarding
#73 is a a feature you use on a telephone line to cancel call forwarding (cfw) of an outside call (some codes may differ). You need to have the dial tone of that outside line to cancel the cfw. to cancel the cfw of a norstar set (internal calls to extension) just press the cfw key or press 'feature #4'
We need help with our Nortel system (T7316E). We don't know the admin password.
feature 985 shows you your vm extension #.
feature 983 then try 1029999 (if password was changed to 9999 or something else)
or maybe feature 983 then 738662 'ok' then 266344 'ok'. depending on the norstar system you have.
these are some codes to enter the vm management. What are you trying to do, reset a vm password or other system programming?
Caller ID
press feature 811 then touch the ringing line and it will display the caler info.
Not finding what you are looking for?