Top 20
RCA 25202RE3 Corded Phone Questions & Answers
How to connect other 16 wireless expanded stations to the base
Bring one of your H5400 handsets close to the 251415 base. The handset's initial procedrure should already be displaying 'PLEASE REGISTER'. In this case, press 'SELECT/SAVE'. Its display should show 'REGISTER...'. Otherwise, press its 'MENU' button, and navigate, through its right arrow button ('>') util its display shows 'REGISTRATION' and press 'SELECT/SAVE'. Press '<' or '>' until you see 'YES' and again 'SELECT/SAVE'. Its display should show 'REGISTER...'
Either way, with the H5400 handset showing 'REGISTER...', now on your 25415 base, press and hold the 'PAGE' button for some 3 seconds, until the H5400 handset sounds a long beep. It it fails, the diplay will show 'FAIL! TRY AGAIN'. In this case, you should repeat the registration process.
Repeat all of the above for each of your remaining H5400 handsets.
Hope it works for you.
Cheers!
Carlos
Can't hear my phone ring when incomming call comes
Disconnect the phone to reset it. Then, reconnect it, and start all over. Press exit button to return to the phone setting menu. Press Menu button,. Use 5 or 6 to scroll to Answering Sys. Press Sel/Save button. And so on.... (This is in your manual, If you have it) If in case you don't have. Just download it from the internet at the following address ------- http//www.retrevo.com/support/RCA-25202RE3-telephone-manual/id/28/2878ag115//5/2/
Cannot record OGA on RCA 25205 corded 2-line phone
There is a misprint in the instructions.
In the section titled "Out-Going Announcement RECORD" on last step it
says Press Exit to stop recording. It should have said Press Sel/Save.
Do this and it will work.
Repeat for Line 2 if you are doing both lines.
Next thing is to make sure you go right to the section titled
"Configure Out-Going Announcement" and select the right type of message
you want callers to hear for each line.
Worked like a charm and took 3 seconds to get 2 different personal messages on the machine.
If the whole procedure isn´t working for the first time, unplug the phone, remove the batteries, and reinstall after 15 minutes.
Please leave a rating!
Not finding what you are looking for?