Top 20
Gestetner DSm515pfd Digital Copier - Printer - Scanner - Fax Questions & Answers
I need to change my toner cartridge, cant figure
Hello
If you open the side cover on the right side of the machine then you will be able to open the front cover.The toner cartridge wil have a green lever if it is not broken off.lift the green lever gently.pull the lever to your side.(Out of the machine to the front). the toner botle is inside this cartridge.Now you wil be able to take it out.Make sure the top of the cartridge come out with the botle.If not it wil stil be in the cartridge. replace the toner botle in the cartridge and push it back in to the machine and push down the green lever,close the front door and the the side door.your machine should load toner to the pcu now.Good luck
6/13/2011 6:24:58 PM •
Gestetner...
•
103 views • 0 helpful votes
I have a line in
I am assuming that the prints are good. Right?
If you already cleaned the exposure glass, the only problem is in the mirrors of the scanner. You need to unscrew the screws of the scanner and clean the mirrors with gently.
Hope this helps you.
See you!
6/13/2011 4:50:44 PM •
Gestetner...
•
51 views • 0 helpful votes
Have a Gestetner Dsm520pf -
First try unplugging the machine from the wall for 5 minutes and then plug it back in. If this doesn't work, you can try this:
1. Press Menu on the control panel until "Maintenance" appears on the top line of the display.
2. Press the scroll button until you see "Clear Memory" on the bottom line and press Enter.
3. Press the scroll button until you see the item you want to clear. I'd recommend the last option, Machine Setup, but be aware this may clear all settings out of the machine.
4. Press Enter.
5. Return to Standby Mode by pressing Clear/Stop.
3/2/2011 4:59:17 PM •
Gestetner...
•
339 views • 0 helpful votes
My Rex Rotary 1508 keeps returning an error code
SC194 SBU White Level Detection Error
your optics could be dirty. your exposure lamp could be bad. your ccd could be bad.
clean the optics fist, then replace the lamp if cleaning did not fix it
1/6/2011 12:59:27 PM •
Gestetner...
•
630 views • 0 helpful votes
I have a Lanier 5635 and its not working. The
546 A Unstable fusing temperature
The fusing temperature varies 50°C or
more within 1 second twice
continuously.
• Thermistor defective(temp. senzors in the fixing unit)
• Poor connection of the fusing unit
• Power supply unit defective
6/23/2010 4:27:07 PM •
Gestetner...
•
515 views • 2 helpful votes
5490+ printer
Please provide me with the Maker and the brand model for this product and I will supply you with a link to the manual.
I care.
Cheers.
2/13/2010 10:26:51 AM •
Gestetner...
•
47 views • 1 helpful votes
I want to know all error codes for nashua tech
Wow, you'll need a service manual for all of that info. Contact the manufacturer to see if it is available to you, as this information is generally only given to dealers or qualified service techs. However I was able to get a service manual for a Panasonic printer I won without too much trouble ($40 US).
10/29/2009 9:24:21 AM •
Gestetner...
•
373 views • 0 helpful votes
Scanner locked
check documentation for the exact location of the lock, usually located on the flatbed.
9/17/2009 4:45:15 PM •
Gestetner...
•
200 views • 0 helpful votes
I am using a gestetner 1502 I am getting and 1/2
It's strange to me the it would take so long to show up. Problems like this typically happen within the first few pages. "Bands" like this are almost always related to the drum or the fuser, but again, it usually happens right away. It's still likely either of those 2 units, but you should have a technician look at it and tell you for sure.
3/27/2009 6:34:41 AM •
Gestetner...
•
282 views • 0 helpful votes
Copier will not load toner
Did you install a new toner bottle? If so did you remove the pull tab or tape that seals the toner from spilling out. If it is a new toner that you know of, do you have another to install. It may be a defective toner. From what you explaining it sounds like there is no toner in the developing unit. Try antother toner first...
1/29/2009 2:03:32 AM •
Gestetner...
•
384 views • 0 helpful votes
Will not add toner
Reinsert cartridge and restart it by unplugging or powering off
It should refresh the memory
Good Luck
1/29/2009 2:07:09 AM •
Gestetner...
•
316 views • 0 helpful votes
Not finding what you are looking for?