20 Most Recent Milwaukee Tool Case Heat Gun - Page 2 Questions & Answers

normally to bleed a power steering turn the wheels from lock to lock several times

check injector timing as for this to happen the injection must be late and you have combustion still going on when the exhaust valve opens.

contact case technical division on the net and see if they can help you

talk to a case service centre and they will advise you on what to do.

bleeder nipples will be at the top of the brake cylinders or calipers . Same as cars

check the drive coupling to the main oil pump at the engine as it may be broken

clean the battery posts and terminals to shiny clean and tighten the clamp bolts.

try contacting CASE on line customer service and enquiring as to where you can get what you require.

the problems will be expensive as there are shafts bearings and bushes that will all be damaged from the lack of oil. I would be making enquiries at the service centre as to what sort of workshop insurance they have to cover that sort of error as it should have had oil levels checked before it was released to you.

I would go on line to CASE customer service and see if one is available and from where

Power steering normally bleeds it self when you turn form left full lock to right full lock several times. This allows any air in the lines to return back to the resevoir

My 1994 1845c case skid steer, Drive assy won't go forwards or backwards on right side tires.Left tires will operate fine.looked into chain area fluid was up, chains okay but fluid looked milky compared to the left drive assy.Could it be the right drive pump that has gone to heaven? When I bought it 2 years ago I noticed the right side DRIVE TRAIN was not as fast as the left when going forwards too.Could you please give me an idea where to look first? Thanks Frank