20 Most Recent Makita DC24SA 24 Volt Makstar Battery Charger Questions & Answers

Je ne connait pas ma code de carte Nordeus

What are you looking for ?

It should tell you on the bottom on the charger what that means. But this means the battery is not taking its charge. Sorry bad battery.

The DC24SA will charge 9.6V to 24V Ni-MH slide style batteries (1.7Ah to 3.3Ah)

Sounds like the battery is no longer good

your fuse went bad replace fuse.

Your charger is malfunctioning. Return it to the point of sale and request warrenty.

most likely your inverter is going bad,,,time for a new charger

look for your local interstate battery dealer thy rebuild them in some areas-price depends on the dealer but is cheaper than buying a new one(should be)

try cleaning contacts on the battery and the charger then push batter in to charge, if the battey is old that will cause it not to charge. How old is the battery?

• When the battery cartridge is inserted, the charging light color will change from green to red and charging will begin.
The charging light will remain lit steadily during charging.
• One red charging light indicates charged condition in 0 – 80% and two red ones indicates 80 – 100%.
• With finish of charge, the charging lights will change from two red ones to two green ones.
• The charging time is as follows:
Battery B9017A, BH1220, BH1420, BH9020A: approx. 20 minutes.
Battery B2417, BH1233, BH1433, BH2420, BH9033A: approx. 30 minutes.
Battery B2430, BH2433: approx. 60 minutes.

Question edited for clarity. Page 8 of the manual. It has a thermal overload reset button. https://images.thdstatic.com/catalog/pdfimages/d7/d7c15f60-bf02-4c9b-9158-301e8e8ea0e0.pdf ..