Duravit Starck 2 One-Piece Toilet - Page 3 - Answered Questions & Fixed issues
My shower does not stay hot for more than 5 Minutes...but the sink stays Hot
It sounds like you have an issue with the thermostatic shower valve mixer. If the bathroom sink is hot, the shower should be.
Or there isn't enough pressure, so after 5 minutes there is not enough water pressure on the hot water tank. Are you in the UK with tanks in the loft? Go up and check the hot water header tank.
..
2/1/2024 3:52:04 AM •
Home
•
Answered
on Feb 01, 2024
•
14 views
How to change fehrenheit to Celsius
Can you give us the model number and brand name of the thermometer you are trying to change? If you have a calculator you can do the math. To convert temperatures in degrees Fahrenheit to Celsius, subtract 32 and multiply by .5556 (or 5/9). Here are some examples for you:
Example: Convert 26° Celsius (a nice warm day) to Fahrenheit
First: 26° × 9/5 = 234/5 = 46.8
Then: 46.8 + 32 = 78.8° F
Example: Convert 98.6° Fahrenheit (normal body temperature) to Celsius
First: 98.6° ? 32 = 66.6
Then: 66.6 × 5/9 = 333/9 = 37° C
1/22/2024 12:15:36 PM •
Home
•
Answered
on Jan 22, 2024
•
1,253 views
Possini 52" Encore Hugger Ceiling Fan, YG217LED-LP-1L, caused arc fault and popped breaker switch. No loose wires or bad connections. Wiring and circuit work. What's the cause and can I repair it?
Since you've already checked the wiring and circuit and found no issues, it's possible that the problem lies with the fan's motor or capacitor. Unfortunately, repairing these components can be difficult and may require the assistance of a professional electrician or repair technician. I do understand this is a costly fan.
If you're comfortable working with electrical components and would like to attempt a repair yourself, you can try replacing the motor or capacitor. However, I would strongly recommend that you exercise caution. To contact the manufacturer of your Possini 52" Encore Hugger Ceiling Fan, YG217LED-LP-1L, you can try the following options:
Possini Euro Design Customer Service: You can contact Possini Euro Design customer service by phone at 1-800-782-1967 or by email at
[email protected].
Lamps Plus Customer Service: Lamps Plus is the parent company of Possini Euro Design. You can contact Lamps Plus customer service by phone at 1-800-782-1967 or by email at
[email protected] .
Online Contact Form: You can also fill out an online contact form on the Lamps Plus website to get in touch with customer service.
1/22/2024 12:49:43 AM •
Home
•
Answered
on Jan 22, 2024
•
36 views
Unscrewed and removed flush button system on Estilo cystern still can't remove lid. Squeezed only back has some give without results.
Assuming you have taken out the flush button framework from an Estilo reservoir and are experiencing issues eliminating the top, here are a few stages you can attempt:
1. Squeeze the Sides:
- As you referenced, have a go at pressing the sides of the tank close to the back. This is a typical technique for delivering the tabs or gets that safe the tank cover. Apply firm however delicate strain while pressing.
2. Lift from the Back:
- In the wake of crushing the sides, take a stab at lifting the rear of the top marginally. Now and again, there are tabs or gets at the front that might should be withdrawn first.
3. Check for Screws or Clips:
- Examine the region around the highest point of the reservoir for any screws, cuts, or different latches that may be holding the top set up. Some latrine tanks have stowed away clasp that should be relaxed or delivered.
4. Tap or Wiggle:
- Tenderly tap or squirm the top while lifting it. This can assist with releasing any close associations or gets that might be holding the top set up.
5. Inspect the Front:
- Actually look at the front of the reservoir for any apparent tabs, gets, or locking systems. On the off chance that present, you might have to press or delivery these to free the cover.
6. Refer to the Client Manual:
- Assuming you have the client manual for the Estilo storage, it might give explicit directions on the most proficient method to eliminate the top. Check for any data with respect to cover expulsion or investigating.
7. Contact the Manufacturer:
- When in doubt, consider connecting with the maker's client care for help. They might have the option to give direction or explicit guidelines in view of the model of your reservoir.
Continuously practice alert while working with plumbing installations, and on the off chance that you're uncertain about any step or experience obstruction, looking for proficient assistance is prudent. Mistaken taking care of can prompt harm or breaks in the latrine tank.
12/17/2023 11:34:58 AM •
Home
•
Answered
on Dec 17, 2023
•
45 views
How do I set the time/date etc on my clock? Model 65904
Ecotech solar clock
I don't have specific information about the Model 65904 Ecotech solar clock, but here are general steps you can try to set the time and date on a typical clock:
1. Locate the Time Setting Button:
- Look for a button that is labeled "Time Set" or similar. This button is often located on the back or bottom of the clock.
2. Press and Hold the Time Setting Button:
- Press and hold the "Time Set" button until the numbers on the clock display start flashing or blinking. This indicates that you are now in the time-setting mode.
3. Adjust the Time:
- Once the numbers are blinking, use the "+" or "-" buttons to adjust the hours and minutes. Some clocks may have separate buttons for hours and minutes, while others may have a single button that cycles through hours and minutes.
4. Set the Date (if applicable):
- If your clock displays the date, you may need to follow a similar process to set the date. Look for a "Date Set" button and adjust the date using the same method as adjusting the time.
5. Confirm the Settings:
- After setting the time and date, press the "Time Set" or a similar button again to confirm your settings. The blinking numbers should stop, indicating that the clock has accepted the new time and date.
6. Check for Other Settings:
- Some clocks may have additional settings, such as a 12/24-hour format or a daylight saving time (DST) adjustment. If applicable, use the appropriate buttons to configure these settings.
If these general steps don't work for your specific clock model, I recommend trying to locate the user manual or contacting the manufacturer directly for assistance. Manufacturers often provide manuals on their websites, or they may be able to assist you with setting the time and date over the phone.
12/17/2023 11:32:39 AM •
Home
•
Answered
on Dec 17, 2023
•
277 views
Not finding what you are looking for?