Duravit Starck 2 One-Piece Toilet - Answered Questions & Fixed issues

I would definitely call a plumber

Duravit Starck 2... | Answered on Jul 21, 2016 | 1,756 views

Look inside the tank under the lid, it sounds like the flapper that lets the water into the bowl is getting hung up on something when you flush. It could be the flushing lever. This would cause the flapper to stay open letting water to just pour into the open sewer line. It should be a simple fix. Just see what is binding the flapper & make an adjustment.

Duravit Starck 2... | Answered on Dec 03, 2015 | 280 views

contact duravit

Duravit Home | Answered on Nov 08, 2019 | 40 views

Are you sure the flapper is dropping back down? Theflush handle may be sticking and holding the flapper valve up.

Duravit Home | Answered on Aug 13, 2019 | 91 views

Try this link: https://www.happyisclean.com/Products-Duravit_Parts.html

Duravit Home | Answered on Dec 16, 2017 | 108 views

Remove and clean the flush valve and the flush valve seat(it is the flap that opens up to allow water to flush the toilet). Once the edges of the valve and the seat are cleaned, possibly with "0000" grit bulldog steel wool, it should not leak anymore. To make sure it is not leaking, once tank has refilled completely, put some food die in the tank. If, after 10-15 minutes, the water in the toilet bowl is colored, you have a leak from the flush valve. Replacing the flush valve is very easy - just bring the old one with you to the hardware/plumbing store and ask for a replacement. Blessings and good luck!!

Duravit Home | Answered on Oct 05, 2017 | 2,618 views

Google the company they will have price and stockist in you area

Duravit Home | Answered on Jun 22, 2017 | 37 views

I have the same problem - do you ever find somewhere to buy one?

Duravit Home | Answered on Nov 14, 2016 | 1,518 views

Lift the top off and see what is happening. These seem very stylish but gimmicky.
5 year warranty on ceramics and 1 year on parts!

Warranty info

Parts and Service

Duravit Spare Parts Distributors

Duravit Home | Answered on Jan 21, 2016 | 655 views

those have a gasket just like a floor mounted one .seriously I would call a plumber on this one .Local to you

Duravit Home | Answered on Nov 02, 2015 | 1,238 views

here you go

Metrix Imports Ltd

155 The Strand, Parnell
1010 Auckland
> Get directions Phone: +64 9 444-5656 Fax: +64 9 444-5151 Homepage: www.metrix.co.nz E-Mail: metrix@metrix.co.nz Distance: 1 km

Duravit Home | Answered on Aug 24, 2015 | 248 views

pull the control section from the cistern. Normally they are only press plastic tabs and the whole unit lifts out.

Duravit Home | Answered on Feb 05, 2015 | 236 views

The check valve may be defective. Replace.

Duravit Home | Answered on Jan 04, 2015 | 215 views

Contact the manufacturer.

Duravit Home | Answered on Dec 28, 2014 | 95 views


Duravit Home | Answered on Nov 05, 2014 | 137 views

The level is determined by a floating device connected to the water valve. Some are on an angled arm and some move up and down.
Determine how your valve is shut off and either change the big round float or adjust the clips on the rising one.
Just keep the level below the overflow and the flush handle to avoid a running toilet or a leak.

Duravit Home | Answered on Aug 22, 2014 | 411 views


Duravit Home | Answered on Jan 29, 2014 | 66 views

If you raise the toilet you will have to raise the plumbing so you have little choice.

Duravit Home | Answered on Nov 29, 2013 | 76 views

Not finding what you are looking for?
Duravit Starck 2 One-Piece Toilet Logo

7 questions posted

Ask a Question

Usually answered in minutes!

Top Duravit Home Experts


Level 3 Expert

85222 Answers

Paul Carew

Level 3 Expert

3484 Answers

Lawrence Oravetz

Level 3 Expert

10543 Answers

Are you a Duravit Home Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides