Daewoo KOR-860A Microwave Oven - Answered Questions & Fixed issues

May problem of microwave oven model.kor-861h is not working fan&heater but ralay&digital display working so what is damages sir?

What you call all functions, I think it's only the front, the keys and the display. I think the main fuse or circuit breaker has tripped. Because when the magnetron does not work nothing will become warm. microwave ovens should not be opened by normal users. The voltage used to get the magnetron fire is very high and can kill you when you touch it. To reach this voltage, there are capacitors inside, that can hold this voltage for a long time. So even with no power cable attached inside can be dangerous voltages. Please don't try to do this yourself. If you want it repaired visit a repair centre, but opening and replacing the defective parts can cost more than a complete new microwave. So first ask what it could cost you if you bring it in for repairs. And check what a new one will set you back.

We don't sell microwave's. We don't sell anything. We only try to help people with answering questions. Not more not less. So if you want to buy, or already bought a Microwave, you have a complaint of, please contact the firm that sells, or sold.

If it's under warranty, contact the

Hi,
Here is a tip that will help you to figure out what is wrong with yourMicrowave Oven....

Basic Microwave Oven TroubleshootingTips

heatman101p][p[]p

Possible that the pad is not working or a possible failure.

Remove cover after disconnecting , check for dirt/moisture in the cabin, if so wipe clean and dry, check the magnetron and area clean and use an jet air to clean off.
Make sure that the program controller is working if not check power - step down supply, the pads are responding- if not faulty pads- or the door switches, if contact is not through the microwave will not work.If only the start button is inactive but you are able to set timing then then the start button pad must be worn out.

Hello,

After you have make our research and you have finalist the finding that getting to the door is the solution to the problem,
here are the solution below on how to go about the problem

On these units they have a self resetting device that you will need to activate this is done by unplugging the oven for at least one hour then plugging it back in and wait for 5 min then press the normal cancel button or you might even hear a click sound then you will be allowed to unlock it okay and close the door hope this helps you out please rate this solution it helps get better results for our customers like you

Thank you and thanks for using fixya.

i cant work out if its broken or not over the years i do remember seeing a sanyo microwave that would not cook untill the time was set though have not seen another since (cause its a silly idea) but try setting the time and it might work

Thanks for your question!

I'm sorry that you haven't received an answer yet.

The response rate on FixYa FREE questions is usually over 80%, but sometimes questions go un-answered when:
1. the question is unclear, incomplete, or poorly worded...
2. the question is mis-categorized - so the correct experts aren't viewing it...
3. the question requires an answer for something that cannot be explained online adequately...
4. specific training, tools, or equipment are required to avoid injury or death...
5. the Experts that are online simply don't have the resources to answer your question fully...

Please feel free to re-work your question if you feel one of these may be the reason.
Of course you are not required - but converting your question to a PAID one usually increases the reply rate as well.

Normal rates for FixYa are...
$ 9.99 answer for one question.
$12.99 Live Real-Time online chat or premium e-mail support.
$29.99 Live Real Time phone support
Sometimes FixYa will run specials for unlimited questions via monthly subscription or reduced rates for limited periods.


Consider the savings that can be had when an informed Expert can save you a $100 service call, or a $350 trip to the car dealership.
Your problem solved - guaranteed! Or your money back!!

If you don't want to pay - feel free to re-submit your question so it returns back to the top of the work queue if you still need help.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for helping with your FREE question

which fuse are we talking about

It is bad for the oven to run it empty, is there something where sparks were and try it with a cup of water.

Turn if off, and leave it alone, remove it, if you can remove the unit, take it in for service, something is wrong if you smell electrical, most people for some reason can smell and identify correctly electrical or at least insulation burning smells, which means something is burning internally, not safe, fire hazard, unit needs to be repaired by qualified technician or replaced with new unit, take no chances, nothing you can do to repair this, could be a shorting transformer, or shorting power cables, but to attempt to trouble shoot this with email is a long shot, and depends on your experience expertize and testing equipment.

I wish I could give you a short easy answer, but the hazard and your safety is more important than a microwave.

Will

This is usually caused by either a bad door switch, a loose door switch mount, or a problem on the control panel.

Even though a door switch clicks, it may still be bad inside. Its continuity must be checked.

Door switch or mount trouble can be caused by slamming the door or by opening the door while it's cooking without hitting the Stop pad first.

There are plastic mounts inside the microwave which hold the door switches and onto which the door latches lock when you close the door.

The screws on these mounts may be loose. If they get too loose, the switches will not be activated properly.

Sometimes it's a broken tab on the switch holder, allowing the switch to rotate just out of position. Other times, it's a broken tab on the switch holder, allowing the switch to rotate just out of position. This tab can be hard to see, since it is under the bottom edge of the switch.

If you or someone you know decide to look into it, we have critical information on safety, disassembly and door switches at our site, and our link is at our listing here on FixYa: http://tinyurl.com/yzjozk

If you think the problem is on the control panel, we repair these nationwide by mail for $39.95 postpaid in most cases.

We're happy to help and we appreciate your thoughtful rating of our answer.

The door latch switches, and monitor switch assembly needs adjusting. With the door open the two latch switches should be normally open,and the monitor switch closed. Opposite way when door is closed. MAKE sure oven is unplugged before testing

Take it to a Daewoo Service Centre, and they can get parts and you don't really want to be messing inside a Microwave.. In normal circumstances, with a cheap make like Daewoo, you just replace them, but get a quote. Help and videos in the link, if you choose to take the risk. https://www.google.com/search?q=Daewoo+KOC-925T+microwave%2Fconvection+touchscreen+will+not+work https://www.fixya.com/support/r29874712-repairing_microwave_ovens ..

read this! https://www.ifixit.com/Answers/View/285420/Daewoo+microwave+shines+but+does+not+heat Time for a new microwave.

take outer case off and find the light .

try putting 90 in the time that should be 1 1/2 hours

Check the rear for a screw cap fuse. If there isn't one, you need a Daewoo service centre.