Lexmark X4650 InkJet Printer - Page 9 - Answered Questions & Fixed issues

Re-seat the black cartridge and make sure it's properly inserted. If error continues, try to insert a different known working black cartridge to determine if the other is faulty.

Remove both cartridges from your printer. Close the cover. Unplug and replug your printer into the power source to reset it. When the printer turns on, reinsert one cartridge first. Close the cover. Check for any error. If none, open the cover and reinsert the other cartridge. Check for any error. Replace whichever cartridge is causing the error to display. Or you could try to insert a different known good cartridge to determine if the other is faulty.

That could be a spooler problem. Make sure the print spooler service on your Windows computer is running. (How to Restart or Reset the Print Spooler in Windows). After following the steps in the article, try to print again.

That could be a spooler problem. Make sure the print spooler service on your Windows computer is running. (How to Restart or Reset the Print Spooler in Windows). After following the steps in the article, try to print again.

You can download the Lexmark X4650 driver for Ubuntu 10.04 LTS by visiting the Lexmark website at http://bit.ly/kQDmKG. You will then have to extract the driver by
sudo tar zxvf <filename.tar.gz.
Ex. sudo tar zxvf lexmark-inkjet-legacy-wJRE-1.0-1.i386.deb.sh.tar.gz
Running the installer script from terminal: sudo sh <installer script filename> ex. sudo sh lexmark-inkjet-legacy-wJRE-1.0-1.i386.deb.sh

If you're asking if the Lexmark X4650 supports spanish language, yes. You can set the printer language by pressing the Setup button -> Device Setup -> Language -> select Español -> press Ok button.

Try this site:

http://support.lexmark.com/index?locale=en&page=product&productCode=LEXMARK_X4650&segment=SUPPORT&userlocale=EN_US&frompage=null#1

Select your operating system from the drop down menu to find the software available for your printer.

If you have lost the disk you can download it from Lexmark website.
http://support.lexmark.com/index?locale=en&page=product&productCode=LEXMARK_X4650&segment=SUPPORT&userlocale=EN_UK&frompage=null#1

Hi

Once you upgrade your operating system, it get new windows registry and your printer driver will not working in the new operating system. I suggest you install the printer driver again and set it up once more. Make sure your printer driver is compatible with your operating system.

Please rate and make a comment if you find this solution very helpful and might help others as well. Post more comments if you need more help.

Regards and thank you for using Fixya !

You can download the Lexmark printer drivers from theirsupport WEB site. Please click on this link and select your model printer todownload :- http://support.lexmark.com/index?page=home&locale=EN&userlocale=EN_US&segment=DOWNLOAD

Sometimes the ink cartridge carrier won't automatically move to its loading position even when the printer is on and the cover is open. Follow the steps below:

1. Unplug the printer from the power source.

2. With the cover open, hold the solid white strip that connects from the carrier assembly to the ink cartridge carrier and gently slide the cartridge carrier to the center of the printer.

3. Remove the used cartridges.

4. Load the new cartridges. Close the cover.

5. Plug the printer back to the power source.

Your cartridges probably needs cleaning. On the printer operator panel, press Setup button -> Maintenance -> Clean Cartridge. Your printer will then print a test page, forcing ink through the nozzles to clean dirts and possible clogs. You may also try to re-seat your cartridges. Or insert a different know good cartridge to determine if it's a faulty cartridge issue.

There are many solutions for this, but a simple way of getting ink to flow again is by using Boiling water.

1. Remove the cartridges from the printer, you can see the print head on the bottom of the cartridge.
2. Simply fill a saucer with approx 2mm of just boiled water
3. Place the print head in the saucer with the head in the water.
4. Leave the head in the water for approx 2 - 5 Mins
5. The Heat will assist in cleaning the head with out using any chemicals, and much better than the internal head cleaning process on the printer itself.

I hope this helps, If so rate this answer below Thank You for supporting the Fix-Ya Community Regards GM

Welcome to Fixya

Just re-install the software drivers of your printer and issue will be resolved.

Thank you for using Fixya! If you need further help, reach me via phone at https://www.6ya.com/expert/elixirjose_00375ea24bd8141b

First you want to make sure your printer has wireless capability. If yes, you want to make sure wireless is turned on. Log into your wireless router, and go DHCP section to find out what IP that assigned to printer. Once you know the IP, you can change the port of printer to that IP via control panel and printers and faxes. Good luck and let me know if need additional help.

I would replace the toner

Please refer to this article in the Lexmark website on How to Scan Using the Lexmark X3600 & X4600 Series All-In-One.

Please refer to this article in the Lexmark website on Printer Cartridge Stalls or Is Blocked . Also, make sure you are using the correct cartridges for your printer model.

Welcome to FixYa!

1. Make sure the printer is on.
2. Lift the scanner unit.
The print cartridge carrier moves and stops at the loading position, unless the printer is busy.

3 Press down on the cartridge carrier latch to raise the cartridge carrier lid.
4. Remove the used print cartridge.

Note: If you are removing both cartridges, repeat step 3 and step 4 for the second cartridge.

Thank you for using FixYa!
Keep me posted!
Jas247