20 Most Recent Lexmark X4650 InkJet Printer - Page 8 Questions & Answers


Did you install the drivers off the cd that came with the printer? And if so, check your drivers and make sure it shows that its there. Maybe then you could look online for a downloadable version.

Lexmark X4650... | Answered on Aug 23, 2011


If an inkjet printer gives white streaks where it should be black, it means the ink is very low, or there is dirt under the nozzles preventing it from printing properly, or, in the case of non original cartridges, ink might be leaking which prevents the bubbles of ink to squirt onto the page.

If the streaks are black where it should be white, is sounds like some dust or fluff below the cartridge leaves ink smears on the page.

Lexmark X4650... | Answered on Aug 23, 2011


Lexmark is one of the most popular printer manufacturers, and the installation process is fairly straightforward no matter what computer brand you have. Lexmark, however, doesn't always include all of the equipment required to hook up the printer. If you want to hook up your Lexmark printer to your Gateway laptop, you will probably need to purchase a printer USB cable.

1.Plug your Lexmark printer into the power outlet.
2.Turn on your laptop, or make sure all software programs are closed if your computer is already on.
3.Insert your installation disk into your Gateway laptop's CD or DVD drive. Wait for the "Welcome" screen to appear. If it doesn't appear after a minute, launch the installation CD manually by going to your start menu and clicking on "Run." In the "Run" field, type: D:\setup.exe
4.Press the "Install" button on your "Welcome" screen to go on to the "Introduction" screen.
5.Press "Continue" on the "Introduction screen" and press "Continue" again on the "Read Me" screen. Agree to the license agreement and follow any additional installation prompts.
6.Connect the Lexmark printer to your Gateway laptop when prompted. Plug the USB cable to the back of the Lexmark printer in the "Quick Connect Laptop Port." Then plug the other end of the USB to your Gateway laptop.

I hope you find it very helpful. Thank you for using fixya.

Lexmark X4650... | Answered on Aug 19, 2011


Try this link: http://support.lexmark.com:80/lexmark/index?page=content&locale=EN&docLocale=en_US&segType=recommendedSegmentMICROSOFT&userlocale=EN_US&id=DR2728

Assuming you are using Windows that should be the appropriate driver set. Click the download link and run the .exe file once it is finished downloading.

Lexmark X4650... | Answered on Aug 18, 2011


Go to Lexmark - United States.

If you need more help post back!
Thumbs and testimonial are welcome!

Lexmark X4650... | Answered on Aug 16, 2011


if you lost your starter disk you can still download it to internet just type installer/model of your printer.thanks

Lexmark X4650... | Answered on Aug 08, 2011


Check to see if the cartridge is clogged or running out of ink.

Lexmark X4650... | Answered on Aug 07, 2011


Why would you ever, ever use the CD a thing came with to install drivers? The ones online at the maker's sites (or service site) are, bar few, much better choices.
Outside of that, if they're both 802.11g, they'll both have sync buttons so you can just hit the one on the router, then the printer, push printer buttons in an affirming way, then go to your laptop and print the queue (or backlog, or whatever.)

Lexmark X4650... | Answered on Aug 06, 2011


Hi

May you remove or uninstall by mistake that's way is not showing now don't install again to follow the mention below instruction.


1) Plug on you USB cable to PC and power on the printer.
2) Put the Lexmark printer software installation CD in you computer CD-Rom.
3) Open the CD-Rom, and duble click the setup exe.
4) The setup will take few minute to install the driver.
5) After installing the driver reboot your computer. and start to printing

Cheer






Lexmark X4650... | Answered on Aug 03, 2011


Hello, Corinne.

For some reason, even though your printer is seen by your wireless network, not seen by your computer.

From your responses, I was unable to tell if you have:

Removed and reinstalled the Lexmark x4650 on your computer

If you have reinstalled and are still experiencing problems, set up your wireless printer on your network again. Let me know if your don't have the setup instructions. Then, you may need to reinstall the printer on your computer.

Hope this helps.

Lexmark X4650... | Answered on Aug 03, 2011


Please refer to this article - How to Set Up the Lexmark X3600 or X4600 Series All-In-One.

Sometimes the ink cartridge carrier won't automatically move to its loading position even when the printer is on and the cover is open. Follow the steps below:


1. Unplug the printer from the power source.

2. With the cover open, hold the solid white strip that connects from the carrier assembly to the ink cartridge carrier and gently slide the cartridge carrier to the center of the printer.

3. Remove the used cartridges.

4. Load the new cartridges. Close the cover.

5. Plug the printer back to the power source.

Lexmark X4650... | Answered on Aug 03, 2011


Good job in re-seating the cartridges into the printer. Try to insert a different known working cartridge to determine if your other cartridge has gone bad.

Lexmark X4650... | Answered on Aug 02, 2011


If you haven't setup a PIN for scanning, try to update your printer driver. Please visit the Lexmark website at http://bit.ly/iofMNC to download the driver. Execute the file to update your existing printer driver.

Lexmark X4650... | Answered on Aug 01, 2011


You might have put it in incorrectly. Sometimes it could be as simple as taking the cartridge out and putting it back head but make sure it is snapped in correctly. Also, you could try unplugging the machine, taking the cartridge out and then replacing it once the machine is on. That could work as well. If it doesn't let me know.

Lexmark X4650... | Answered on Jul 26, 2011


Unplug the power supply(the black box behind the printer where the power cord is attached).
Hold down Start and Cancel buttons at the same time while plugging back the power supply.
Keep on holding down the 2 buttons firmly until English Language Selection appears on the the display.

Lexmark X4650... | Answered on Jul 21, 2011


You can download the Lexmark printer drivers from theirsupport WEB site. Please click on this link and select your model printer todownload :-http://support.lexmark.com/index?page=home&locale=EN&userlocale=EN_US&segment=DOWNLOAD

Lexmark X4650... | Answered on Jul 18, 2011

Not finding what you are looking for?
Lexmark X4650 InkJet Printer Logo

675 questions posted

Ask a Question

Usually answered in minutes!

Top Lexmark Office Equipment & Supplies Experts

Clive
Clive

Level 3 Expert

4345 Answers

Ekse

Level 3 Expert

13434 Answers

Thomas F. Schneider

Level 3 Expert

2715 Answers

Are you a Lexmark Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

X Lexmark

  • X Lexmark

Most Popular Question

lost software cd lexmark x4650

  • Office Equipment & Supplies
Loading...