20 Most Recent
Epson Stylus NX400 InkJet Printer - Page 8 Questions & Answers
My epson nx400 getting message
Have you taken out the spacer between the cartridge and its locater handle? Else just try taking the cartridge out and re-inserting. If this fails have you tried powering the printer off, waiting 20 secs, and truning back on.
Hop this helps.
Epsom stylusDX4450 how do I replace the cartridge
It seems that you installed your printer through the cd provided alongwith your printer. In this case the manual also must have been installed. Kindly click/start....all programs....c/epson....software and tech' guide. There you will get the step by step guidence on replacing the cartridge or else just get the cd and explore it for the pdf manual. In case you don't get it kindly let me know. I'll provide you a link to download it.
Have Epson DX8400. Have tried
The cartridges are chipped, you have to use all genuine epson or an equivalent with the correct chips. Not all replacement carts are correctly chipped.
If you do have genuine cartridges fitted remove them all and clean the gold chip part with a soft tissue and firmly seat the carts. Hope that helps.
The NX 420 is Printing
Hi!
Are you printing from your computer? Sounds like your driver software is corrupted. Uninstall and reinstall driver software.
Hope this helps.
My Epson SX415 will no longer recognise non-Epson
If the printer is telling you to do this then you may be out of luck... but if the message is cropping up on the computer you can disable the nag screen using this approach:
- Go to Printers and Faxes (or the equivalent screen that lists all your printers)
- Right click your SX415 printer and choose "Printing Preferences"
- Click on the "Maintenance" tab
- Click on the "Speed & Progress" button
- Tick the "Disable EPSON Status Monitor" checkbox
- Click on OK
- Click on OK to close the Preferences window
That should about do it...
This stops the nagging at least but I can't guarantee that it will force the printer to continue...
Hope it helps.
Martin
I have a Printer NX410 Printer that is out of
Spoke to Epson, said to slightly push down ink drum and push a little to the left if it is already to the right. Was given a local number where I could take it for repair, but just to look at it would be $30 which could be applied to final cost. Labor was to be at least $90. Why bother? You can get a new one cheaper. goto
epson.com/loyalty and you will get a discount on a new purchase.
Gentleman I spoke to, was so nice and wonderful to chat with. Today I am going to try to fix it myself. If I break something so what, my new one will arrive in two days.
We changed my cartridge of
Is it a new original Epson cartridge? Try another cartridge. If it is not the cartridge you have a problem with your print head.
good luck.
The black ink will npt come through
Hi,
If you have just installed a new ink cartridge and an
ink low or
Replace ink cartridge message is still displayed, the cartridge may be incorrectly installed.
Follow these steps to make sure the cartridges are correctly installed:
- Press the On button to turn on the Epson Stylus, or (if already on) press the Setup button.
- Select Maintenance and press OK.
- Select Change Ink Cartridge and press OK.
- Open the scanner.
- Open the cartridge cover.
- Press down all the ink cartridges until they click into place to make sure they are properly seated.
- Close the ink cartridge cover and push it down until it clicks into place.
- Close the scanner.
- Press OK to begin charging the ink. This takes about 2 minutes.
You see a message on the display screen when ink charging is finished.
Caution:
Never turn off the Epson Stylus while ink is charging or you'll waste ink.
If
you remove an ink cartridge for later use, protect the ink supply area
from dirt and dust and store it in the same environment as the Epson
Stylus with the label facing upward. Note that there is a valve in the
ink supply port, making covers or plugs unnecessary, but care is needed
to prevent the ink from staining items that the cartridge touches. Do
not touch the ink cartridge ink supply port or surrounding area, and do
not store the cartridge upside down.
If you remove a low or expended ink cartridge, you cannot reinstall and use the cartridge.
Thank you for contacting FixYa
*Please rate this solution with thumbs up
Need to down load Epson NX400 printer disc
Epson NX400 Drivers & Downloads are available at: -
http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?oid=106004&prodoid=63075469&infoType=Downloads&platform=Windows
Select your operating system and download the required drivers and utilities.
CreativeTECH
Not finding what you are looking for?