20 Most Recent
- Page 3 Questions & Answers
Missing realtek sound driver
you can go to the realtek website ,type in your pc model type and get the sound drivers,,or you can go to your control panel and restore your system to before it went dumb, 2 or 3 restore points back,day before u got dat problemo,,thanks
on Dec 01, 2013
My printer will not print some colour photos the
Probably a blocked printhead.
Make a simple graphic using something like PAINT.
Small filled colour squares - one for each colour of cartridge your printer has.
You'll soon see which part of the printhead is clogged.
Make a simple
Sometimes they respond to cleaning, sometimes not.
on Oct 08, 2013
White lines on printed photos Epson Stylus NX400
You need to clean the print head on the cartridges , please follow these steps\
# Hold the cartridge upside down, with the bar-code label facing you and take a damp paper towel.
# Use the towel to wipe the printhead of the cartridge on the bottom (where the ink comes out). Wipe the printhead horizontally in one direction only (left to right).
# Continue doing this until it looks clean.
# Then dab the cartridge on the towel to make sure the ink is flowing.
# Next, look inside the printer and locate the carrier that holds ink cartridges. Caution: Make sure the cartridges are not installed at this point.
1. Look for a shiny piece of metal underneath the contacts at the back of the carrier.
2. Take a damp cotton swab (use water only!) and wipe along the bottom of the shiny metal piece. Note: You may need more than one swab.
# Reinstall the cartridges, making sure you snap them correctly into the printer.
on Jul 12, 2013
How do you replace ink in EPSON TX110?
The procedure is shown on the panel you can see if you open the cartridge compartment of your TX110. However, it can take some effort to decipher the icons. It is known to work if the ink low light is on, untested otherwise.
- Turn on the printer.
- Press and hold the STOP button until the cartridge tray moves out of its bay. It will stop at the ink low notch pointing to the first cartridge out.
- Press STOP again. The cartridge tray will move to show you the next cartridge low on ink.
- Repeat until you know all cartridges out. After the last cartridge pointed to, the tray will move again and stop in the area where all cartridges can be accessed by hand.
That's it folks!
on May 24, 2013
My Epson NX415 does not recognize refilled and
Don't let your ink levels drop below 25% before refilling and resetting your cartridges. There is an inner and an outer chip on these cartridges. The inner chip disables the outer chip when it's contacts are no longer bathed in ink. So, it doesn't matter if you "reset" the outer chip after refilling your empty cartridge because the chip was disabled. I'm really curious how you refilled these cartridges yourself without souring yourself on refilling from the experience. I own a Cartridge World ink refilling store and I refilled a set of these cartridges when we had replacement chips available (we don't now because our chip distributor was violating Epson patents) and it was an absolute mess, took forever, and the cartridges still didn't work in our test printer.
on Apr 08, 2013
Nx420 blank pages
Inkjet printers need to be used frequently to prevent ink drying out and blocking the print head nozzles.
If the print head cleaning maintenance routine does not clear the blockages, then print head needs replacing, but it may be expensive.
It may be more cost effective to buy a later model and better printer than replace the print head.
on Mar 09, 2013
Not finding what you are looking for?