Top 20 Sanyo Xacti VPC-CG9 Digital Camera Questions & Answers

memory card connector in camera is defective,,clean & set pins

p17.dll is a dll associated with the P17 AudioControlX2 Module. Non-system processes like p17.dll originate from software you installed on your system. As most applications store data in your system's registry, it is likely that your registry has suffered fragmentation and accumulated harmful errors. It is recommended that you check your registry to identify hidden errors now.Most non-system processes that are running can be stopped because they are not involved in running your operating system. p17.dll is used by 'P17 AudioControlX2 Module'.This is an application created by 'Unknown'. To stop p17.dll permanently uninstall 'P17 AudioControlX2 Module' from your system. Uninstalling applications can leave registry keys that bloat your registry. We recommend you scan your registry for fragmented and obsolete entries.

Video clip cutting (extracting)
1
Display the video clip from which you wish to extract a segment.
2
Display the NORMAL Mode
Playback Menu (page 37), select
"EDIT VIDEO, and press the
button.

3
Select CUT!! and press the SET
button.
The Cutting Screen appears.

4
Specify the start point of the extract.
Use the procedure below to specify the frame from which the video clip extract will start.
• Play the video clip until approximately the desired point, pause the video clip, then play the video clip one frame at a time, stopping at
start point of the extract. This will be the first frame of the extract.
• If the start point of the video clip is also the start point of the extract, proceed to step 5.

Play:
After pausing playback, press and hold the SET button to the right
about 2 seconds for forward playback, or to the left for reverse playback.
Pause:
During playback, press the SET button.
Accelerated playback:
During playback, toggle the SET button to the left or right to change the playback speed.
Single frame:
After pausing playback, toggle the SET button to the right to move forward one frame, or to the left to move back one frame.
5
Toggle the SET button up.
• The start point of the video clip
extract is set, and the screen
•Specify the end point of the
extract by following the same
procedure as in step 5.
a. Toggle the SET button down.
Each time the SET button
toggled down, the sections
delete and the sections to
save are reversed.
b. Specify the end point of the extract. The frame following
end point of the extract will
the start point of the latter portion to be joined.
6

Press the VIDEO CAMERA button.
A screen appears for you to select either to save the edited video clip as a new (separate) file, or to delete the original video clip and replace it with the edited video clip.
SAVE AS NEW:
The edited video clip will be saved as a new file. The original video clip remains unchanged.
OVERWRITE:
The original video clip will be deleted. Only the edited video clip will be saved.
REVIEW CLIP:
Play back the edited video clip before saving it.
7
Select the desired option, and press the SET button.
• Editing starts.
• When editing ends, you are returned to the NORMAL Mode Playback
Menu.


I think this is what you are after if this isn't what you need you can find the manual at
http://www.retrevo.com/support/Sanyo-VPC-CG9-Camcorders-manual/id/18378dj397/t/2/

hi, your camera problem isn't clear but sound like shutter unit does not initializing. I don't think you can save. It is not simple job for if the shutter problem then local repair shop would charge you $65 to 135 mostly. good luck with you

Your problem is in trying to mix and match old and new technology.

Your camera can handle SD cards up to an absolute maximum capacity of 512MB (as per page 21 of the user manual). It's incapable of operating with anything of a higher capacity and totally incompatible with the SDHC card you appear to be trying to use.

Your only fix is to either limit yourself to 512MB maximum capacity SD cards, or to replace the camera with a modern SDHC compliant model which will accept your new card.

I hope that you have found my free reply to be clear and useful and that you can take a brief moment to rate my answer.

give me the detail abt the error messege

Consider NOT connecting your camera to your computer.

The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster than connecting the camera to the computer, and won't run down your camera's batteries.

Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive, the same way you copy any other files. Or you can use any photo cataloging program.

Post your sanyo software pack in ISO-format, to my controll.

You'll need SD card reader (Ebay $5 for exc.)
Take card from your camcorder and put it in to card reader. Connect card reader to USB port and you'll get your pictures

I suggest altering the settings a little and if that doesn't work try using a different software to enlarge images. Such as windows photo gallery. That's not too good for enlarging just good for keeping the quality up if that isn't good enough try using a free trial of photo shop.
Hope I helped Dr Red

yes, here is a good one for you:
Video Download Studio gives you the ability to download any youtube video in various video or audio formats to your computer in seconds, formats include mp3, wav, avi, wmv, 3gp, mov, mp4, mpg, mpeg, ...

i have exactly the same problem and would love to find a solution soon! please help.

Try installing MCP Star player, it's free and it plays just about any video. Get it here http://www.mpcstar.com/

Repairing camera is a specialty. so unless you have this skill you'll have to let someone else fix it. i sent my camera to be fixed to: www.camerarepair.com they were reasonably priced and have a 6 month warranty. they're pretty quick also.

An external mic connection doesn't make much sense in a waterproof camera. Perhaps switching off the Sound Wind Noise Reduction might enhance the "boomy room sound"?

The CG9 Users Manual suggests that once the USB cable is connected, a USB menu will pop up on the camera. This is where you can choose for the camera to be a USB Card Reader, allowing you to access your files, rather than it acting like a webcam for example. When acting as a USB card reader, no other drivers are supposed to be required.

You could also try removing the card and placing it in an external USB card reader.

Page 167 in the manual also describes how to get the camera to point your computer to a support website. It says that if the card is removed, and then the cable connected, and then the camera is turned on, a connection menu will popup and "Computer" should be selected, and then "Card Reader" should be selected. Since the card has been removed, an internally stored link is supposed to popup to direct you to the support website.

This is most likely that CG9 Support website.

Sanyo seems reluctant to allow people to download the commercial software that is bundled with the camera when you buy it. I have read that you can request a free CDROM from them with some kind of proof of purchase, but I don't see where one can make that request.

You can find the CG9 Support Website here, where there are links to the manuals, and to software with no licensing issues.

You should be able to access the photos and the videos on the camera from your computer without any commercial software. If you can be more specific with what you are trying to do with the camera I can try to help.

Hi.

This camera does not require additional drivers, on Sanyo website only additional software is supplied.

Ensure that the USB setting menu on camera is set to Connect to Computer, as described on manual at page 167.



Test using a different USB cable, and test the camera on a different computer.

If still no luck, and you get same problem on any computer, then the camera may be faulty, in that case contact Sanyo at the number listed on the owners manual.

Check first settings and USB connection.

Regards.

The free software for the Sanyo CG9 is available at the Sanyo CG9 Website. The commercial software that shipped with the camera is not available for download there.

Here is the Sanyo CG9 support page.

If you are more specific with your questions, we can try to be more helpful.