Sony Cyber-shot DSC-T77 Digital Camera - Answered Questions & Fixed issues
E62.02 message on the screen
i have sony dsc t 300 camera & when i start my camera there is a message on screen E62.02 & then camera auto USB connect mode
Accepting Language
Try charging it to see if that helps if its under warranty bring it back or google to to try a factory reset
I want to use self
Touch the self-timer button (the one-handed clock) on the touch panel to cycle through the self-timer modes. Start the self-timer by pressing the shutter release button.
System Error
You should try some photo recovery software to rescue the files on your camera card, here are some you may rely on. Both programs can also recover videos and music.
Photo Recovery Software (for Windows)
Mac Photo Recovery Software (for Mac OS X)
Be careful: Before your pictures are recovered, do not attempt to save more files to the card in case the original files(your pictures) are overwritten.
My DSC-T77 screen suddenly goes
Those are the downloaded pictures correct? If so this means that the imaging sensor has gone bad in the camera. Which most likely then means you would want to replace it over repair it as its a fairly expensive repair if there are still parts available to repair it.
Thank you,
Lee
Hi, i was wondering if
It's a lens problem - the lens sometimes gets debris in between and does not extend out enough to take clear pictures or the lens is crooked from impact or damage. As for the touch screen and not being able to read the menu on your screen, that's also damage. Don't think factory settings will fix this problem. Did you try troubleshooting on google for your camera - maybe they have some fix it suggestions.
Sony cybershot hd DSC-T77 its a full Hd 1080 10.1
Hi.
If the digital camera takes pictures, and the pictures can be viewed correctly in the computer (check that they are not all lines and fuzzy), then the problem is usually the LCD assembly.
If instead the camera takes pictures, but pictures are all blurred and made of streaky lines, then the problem is a faulty CCD sensor.
To get a quote on repair call Sony customer service. You can compare with a quote from a third party using this link:
Repair. Ask Sony first, their conditions are usually good and the camera may still have some warranty on it.
Regards.
Ginko.
My sony digicam is not
These type of problems are usually caused by not fully charged batteries might be worth trying out a different fully charged battery.
I want picture
Hello
unfortunately you do not give sufficient information on the
problem. Please be more specific. Try to explain more exact details on
the problem.
Kind regards
Andrea
My camera turns on by itself even with the slide
Most likely some dirt, dust, or other particle is jamming the lens opening gears. You can try to spray some compressed air into the lens assembly, hopefully dislodging whatever is obstructing the lens cover. If this doesn't work, the camera will have to be serviced, which can be expensive. If the compressed air doesn't work, and you decide to have it fixed, get an estimate first. Often the cost of repair justifies going ahead and purchasing another camera.
Good luck, thanks for using FixYa, and hope this helps!
SYSTEM ERROR C32:01
Try just locking and then unlocking the card and reinserting it. Its possible the memory card is damaged, you can try another memory card and should resolve the issue.
Not finding what you are looking for?