Pride Jazzy 1103 Ultra Standard Power Chair - Answered Questions & Fixed issues

I'm making over $7k a month working component time. I saved hearing other people inform me how much cash they could make online so I decided to look at it. Well, it turned into all proper and has definitely modified my life. This is what I do...www.cash.hiring9.com

Greetings, please use a multimeter to check for bad wires in your scooter. One found, you can replace each wire and check your lights again. Thank you.

ajnss I need more information. can you turn the power on at the joystick? are you getting all the lights for battery level lit? are any of the lights blinking on the joystick? do you hear a clicking noise when you try to move the chair? Give me as much info as you can thanks

Take it in for service. It sounds like it has been modified or something is stuck in the motor fans. We are Fixya, we aren't the maker of your unstated make and model scooter. I moved the question for one of our mobility scooter Categories, purely as a guess!

Hello you may check this out. You can also buy the batteries here.

It isn't published anywhere. You will have to contact them direct and prove that you are competent to deal with the electronics. https://www.pridemobility.com/pdf/owners_manuals/us_jazzy/us_q1121_om.pdf //

Has the chair been put in "manual mode"? Make sure of this and that batteries are secure.

http://www.pridemobility.com/pdf/owners_manuals/us_jazzy/us_jazzy_1103_om.pdf Look on page 15

https://www.pridemobility.com/.../US_Jazzy/US_Jazzy_1170_om.pdf On page 16 is the location of the circuit breaker.

yellow light is flashing and i can't turn chair off. still operates.

Try this https://www.youtube.com/watch?v=mkCEL5MotSg

They have complicated control computers and are very touchy concerning the amount of voltage in various parts of the system, such as how much current the motor is drawing. Sometimes transmissions go dry of oil causing the gears to bind, throttles develop oxidation on the contacts, terminals get corroded. I had to bypass my original unreliable controller completely with a DC variable speed board from China. Test your batteries by connecting each to their own standard car charger. Get the back wheels off the ground with blocks and test run the motor while connected to the chargers. And test each battery with something powerful that can determine its strength, not just a small test light.The chargers are reliable, but the control brain (module) maybe not. Make sure your batteries are not dry, make sure fuse is OK, terminals are clean, charging system must be unplugged to run, test test test. Make sure the speed limiter is tried in various positions, parking brake or lock is in correct position.

Pride Mobility Jet 7 (Power Wheelchairs) - USA Techguide

www.usatechguide.org/itemreview.php?itemid=929

13 posts - ‎11 authors Anti-Tip Wheels 6&8221; solid; front-mounted • Suspension Limited. ... get either aPride Jazzy, or a Jet 7, you'll be very happy, as long as you can afford a lift ... If youdont, the charge keeps going down, and will not ever recharge back to the ... These products need to be charged about 8 hours a day after usage, so its better ...

What is your question? Just what is the problem? Is it running?

Hello,repeat that to a service person.They should be able to give you a price for the job.

Hello,type your issue into YouTube Videos.I am sure you will find what you are looking for.Just remember,if you attempt repairs yourself.Take a Step by Step pic guide,as repair people may not want to look at it.Being you worked on it yourself.

http://www.manualslib.com/manual/134640/Pride-Mobility-Jazzy-Select-7.html . This is the owner's manual. It describes the trouble codes. You can download it to refer to it again.

The speed light flashing usually indicate that the chair is in "Limp Mode" This could be either the motor is getting too hot or the chair has a lift on the seat. If the chair runs fine for a while and then this condition appears, you may have a bad motor or a brake dragging causing the motor to get hot. the controller will allow less power to the motors to help it cool down and still keep you mobile. If you have a lift on the chair that raises up the chair, you will have to lower the chair down to gain the full power back. If neither one of these solutions are the problem, then you will need a Tech to come out and look at the problem. you may have a more serious problem that a tech can troubleshoot.

There is a sequence of a button push while moving the joy stick in a certain direction untill it beeps. Check the owners manual for the exact sequence. You can download the manual from Pride's website.

When the charger is plugged in , it automatically disconnects power from the controls while the batteries charge. Once the batteries are charged and the charger is disconnected then the lights will work.