20 Most Recent
Pride New Jazzy 600 Power Wheelchair by Mobility - Page 5 Questions & Answers
I have a pride victory 9. And I need to know how to remove and replace the speed pot.
Re-check you have removed all of the screws as they sometimes have a extra ones positioned in a hidden and difficult places to get at or you need to remove another trim piece to release the panel you want to take off, possibly the knee panels on the tiller bar. The pot and key barrel will be mounted to the trim panel directly so won't be holding the trim down. The trim panel itself may be held in place with moulded clips so you may need to GENTLY lever along the seam between the panels to 'Pop' the panel loose.
Most scooters of that type have a speed pot that is held in place with a small nut. The plastic 'button' you twist to alter the speed setting is a 'push on' cover. It will be a tight fit but it should simply pull straight up and off revealing the small nut holding the pot in place.
New batteries, fully charged, still wont work. No power at all.
You have a fault in one of the following , blown fuse , faulty switch , faulty motor . With a volt meter or trouble light check for battery voltage at the motor while in drive mode , if there is battery voltage the motor is at fault , if no voltage check bask till you find voltage and the fault .
Not finding what you are looking for?