Simplex Kaba Ilco Unican 1000 keyless lock - Answered Questions & Fixed issues
Forgotten cipher lock combo
First, you need to have access to both sides of the lock (door must be open).
If you are technically able, you can disassemble the lock, remove the combination unit and take the cover off of it. From there you can determine the combination and then re-assemble. The instructions for this can be found online.
If you are not technically able, you should not attempt this and bring the lock to a locksmith or get a new one.
1/25/2015 3:42:16 PM •
Simplex Kaba...
•
Answered
on Jan 25, 2015
•
284 views
How can i remove a unican lock
You will find installation manuals on this page:http://www.kaba-ilco.com/kaba-access-control/Documentation-Support/292720/simplex-mechanical-pushbutton-locks.htmlYou may need to install Adobe reader if you cannot view the documents. There is a "Get Adobe Reader" link found just above the chart if you can't.Customer service can be contacted from this link:http://www.kaba-ilco.com/access_control/support_contacts/service_and_support.aspxTech Support from this link:http://www.kaba-ilco.com/access_control/support_contacts/technical_support.aspx
10/5/2012 9:59:50 PM •
Simplex Kaba...
•
Answered
on Oct 05, 2012
•
1,135 views
Do not no the code to my unican 5 # lock
You will find a link to download the manual for your model on this page:http://www.kaba-ilco.com/access_control/literature/literature_grid_mechanical_pushbutton_locks.aspx?id=13Hover your mouse over "PDF" under the "TIPS" column and the two choices of "Changing the Code/Combination" or "How to Reset a Lost or Unknown Combination" will appear--move your mouse over the appropriate one and click to download the info.These are PDF files, requiring Adobe Reader to open. There is a link on the same page to download Adobe reader, if the file will not display for you.
8/24/2012 4:01:39 PM •
Simplex Kaba...
•
Answered
on Aug 24, 2012
•
345 views
Combination lock change
PROCEDURES TO CHANGE THE COMBINATION OF SIMPLEX 1000 SERIES CIPHER LOCKS1.) ENSURE THE DOOR IS OPEN.2.) INSERT THE DF-59 CONTROL KEY INTO THE COMBINATION CHANGE PLUG ASSEMBLY (ON THE BACK OF THEDOOR) AND UNSCREW THE CYLINDER BY TURNING THE KEY COUNTERCLOCKWISE.3.) TAKE THE CHANGE PLUG ASSEMBLY COMPLETELY OUT OF THE DOOR.4.) TURN THE OUTSIDE DOOR KNOB CLOCKWISE ALL THE WAY UNTIL IT STOPS, THEN RELEASE THE KNOB.5.) PRESS IN THE EXISTING COMBINATION FIRMLY.6.) INSERT THE SPANNER WRENCH IN THE COMBINATION CHANGE SLEEVE. IT SHOULD INSERT AT THE NINEO'CLOCK POSITION.7.) TURN THE SPANNER WRENCH GENTLY CLOCKWISE UNTIL IT STOPS AT THE 12 O'CLOCK POSITION. NOTETHE NOTCHES IN THE COMBINATION CHANGE SLEEVE MOVES AS THE SLEEVE IS MOVED.8.) TURN THE SPANNER WRENCH COUNTERCLOCKWISE BACK TO THE NINE O'CLOCK POSITION UNTIL IT STOPS.REMOVE THE SPANNER WRENCH.9.) TURN THE OUTSIDE DOOR KNOB CLOCKWISE (ALL THE WAY, UNTIL IT STOPS), THEN RELEASE.10.) INSERT THE NEW COMBINATION BY PRESSING IN THE BUTTONS. USE AT LEAST three numbers and amaximum of five.11.) TURN THE DOOR KNOB CLOCKWISE ONCE, ALL THE WAY, UNTIL IT STOPS. HOLD IN THIS POSITION ANDCHECK IF THE LATCH IS RETRACTED.12.) RELEASE THE DOOR KNOB.13.) TURN THE DOOR KNOB CLOCKWISE ONE MORE TIME TO THE STOP POSITION. AT THIS POINT, THE LATCHSHOULD NOT RETRACT UNLESS YOU USE THE NEW COMBINATION.14.) REINSERT THE CYLINDER INTO THE BACK OF THE DOOR BY SCREWING IT IN CLOCKWISE WITH THE DF-59CONTROL KEY (DO NOT OVER TIGHTEN!)REMOVE THE KEY.A Df-59 key can be purchased at this site:http://absupply.net/kaba-access-control-lock-1000-series-key-df59.aspxThe spanner wrench (SMPBC201278 Simplex:Spanner Wrench $9.00) referred to can be purchased from this site:http://www.ckilock.com/Mpage18.aspYou will find a link to download the manual for your model on this page:http://www.kaba-ilco.com/access_control/literature/literature_grid_mechanical_pushbutton_locks.aspx?id=13Hover your mouse over "PDF" under the "TIPS" column and the two choices of "Changing the Code/Combination" or "How to Reset a Lost or Unknown Combination" will appear--move your mouse over the appropriate one and click to download the info.These are PDF files, requiring Adobe Reader to open. There is a link on the same page to download Adobe reader, if the file will not display for you.Good luck!
5/18/2012 10:55:05 PM •
Simplex Kaba...
•
Answered
on May 18, 2012
•
222 views
Lost the df-59 key and need to change the combination
For $9 you can get the df-59 key and spanner wrench from this company:http://www.ckilock.com/Mpage18.asp ,10th item down on pageC.K.I. Wholesale Lock Supply 1-800-445-5230Their item number SMPBC201278Hope this helps!
2/23/2012 4:04:40 PM •
Simplex Kaba...
•
Answered
on Feb 23, 2012
•
1,591 views
Simplex unican L1000 lock, occasionally the top
Customer service can be contacted from this link:http://www.kaba-ilco.com/access_control/support_contacts/service_and_support.aspxTech Support from this link:http://www.kaba-ilco.com/access_control/support_contacts/technical_support.aspx
11/10/2011 1:56:37 AM •
Simplex Kaba...
•
Answered
on Nov 10, 2011
•
187 views
Lock failure where can i get these repaired cheap.
You will find a link to download the manual for your model on this page:http://www.kaba-ilco.com/access_control/literature/literature_grid_mechanical_pushbutton_locks.aspx?id=13Hover your mouse over "PDF" under the "TIPS" column and the two choices of "Changing the Code/Combination" or "How to Reset a Lost or Unknown Combination" will appear--move your mouse over the appropriate one and click to download the info.These are PDF files, requiring Adobe Reader to open. There is a link on the same page to download Adobe reader, if the file will not display for you.Good luck--and please provide feedback if this helps!Customer service can be contacted from this link:http://www.kaba-ilco.com/access_control/support_contacts/service_and_support.aspxTech Support from this link:http://www.kaba-ilco.com/access_control/support_contacts/technical_support.aspx
11/9/2011 5:12:49 PM •
Simplex Kaba...
•
Answered
on Nov 09, 2011
•
113 views
The backset spring on our double-pole lock/latch
Customer service can be contacted from this link:http://www.kaba-ilco.com/access_control/support_contacts/service_and_support.aspxTech Support from this link:http://www.kaba-ilco.com/access_control/support_contacts/technical_support.aspxGood luck!
11/8/2011 5:37:33 PM •
Simplex Kaba...
•
Answered
on Nov 08, 2011
•
111 views
Need to change lock code
In the case of a lost combination, Kaba Ilco recommends that you call their technical service department:"This is a lost combination situation.Please call our Technical Service Dept.For further information at (800) 849-8324or (336) 725-1331."They are located in North Carolina, so the best time to call is probably during east coast business hours.Good luck--and please provide feedback if this helps!
11/8/2011 4:59:52 PM •
Simplex Kaba...
•
Answered
on Nov 08, 2011
•
224 views
I tried to change the
You have probably inadvertently created a lost combination situation. In the case of a lost combination, Kaba Ilco recommends that you call their technical service department:"This is a lost combination situation.Please call our Technical Service Dept.For further information at (800) 849-8324or (336) 725-1331."They are located in North Carolina, so the best time to call is probably during east coast business hours.Good luck--and please provide feedback if this helps!
11/8/2011 4:57:22 PM •
Simplex Kaba...
•
Answered
on Nov 08, 2011
•
240 views
When i turn the knob without entering the combo,
"If your lock is opening on every turn of the knob or lever, except upon entering a code, this may be a ZERO CODE. Before attempting to remove the lock from the door, refer to the troubleshooting procedures outlined at bottom of this document for a zero code symptom/solutionSolution: Follow the procedure for changing a combination except omit step 3 (do not enterthe existing combination)."I excerpted the above from the full instructions on how to change the code. If you don't have them, got to this link:http://www.kaba-ilco.com/access_control/literature/literature_grid_mechanical_pushbutton_locks.aspx?id=13and go across from L1000 to the last column, "Tips".When you hover your mouse over PDF, two choices will appear; left click on the upper one, "Changing the code/..." to download it.The download will be a PDF file format. If you are unable to open it, you will need to download and install Adobe Reader on your computer. There is a link (Get Adobe Reader) at the top right of the literature grid.When you do get the download open, you will have the stepwise procedure and illustrations necessary-but don't forget to omit Step 3, if you believe that you have the ZERO code problem!Good luck--and please provide feedback if this helps!
11/6/2011 9:09:28 PM •
Simplex Kaba...
•
Answered
on Nov 06, 2011
•
214 views
Ilco unican- USA
We would like
Customer service can be contacted from this link:http://www.kaba-ilco.com/access_control/support_contacts/service_and_support.aspxTech Support from this link:http://www.kaba-ilco.com/access_control/support_contacts/technical_support.aspx
11/6/2011 8:32:07 PM •
Simplex Kaba...
•
Answered
on Nov 06, 2011
•
404 views
How to make a house keeping authrization key
I don't know whether this can be done. I recommend that you contact Kaba Ilco directly for assistance:Customer service can be contacted from this link:http://www.kaba-ilco.com/access_control/support_contacts/service_and_support.aspxTech Support from this link:http://www.kaba-ilco.com/access_control/support_contacts/technical_support.aspx
11/6/2011 7:49:44 PM •
Simplex Kaba...
•
Answered
on Nov 06, 2011
•
219 views
How do i change the
I have reviewed the installation instructions and in the case of a lost combination, Kaba Ilco recommends that you call their technical service department:"This is a lost combination situation.Please call our Technical Service Dept.For further information at (800) 849-8324or (336) 725-1331."They are located in North Carolina, so the best time to call is probably during east coast business hours.Good luck--and please provide feedback if this helps!
11/5/2011 9:01:13 PM •
Simplex Kaba...
•
Answered
on Nov 05, 2011
•
167 views
Had to replace a return
I recommend that you contact Kaba Ilco directly with your problem.
Customer service can be contacted from this link:
http://www.kaba-ilco.com/access_control/support_contacts/service_and_support.aspx
Tech Support from this link:
http://www.kaba-ilco.com/access_control/support_contacts/technical_support.aspx
Good luck!
11/5/2011 8:13:29 PM •
Simplex Kaba...
•
Answered
on Nov 05, 2011
•
390 views
Not finding what you are looking for?