20 Most Recent Black & Decker Pivot Plus Cordless Drill/Screwdriver - Page 9 Questions & Answers

There are one-way (non-reversible) and two-way (reversible) drills. Mine is one-way. Methods for chuck removal are different for these two types.
Procedure for one-way (non-reversible) drills:
Drills of this type have no chuck screw, so one have to hold the spindle with a wrench, than to sharply strike the wrench with a hammer to spin it off.
Procedure for two-way (reversible) drills:
Open the chuck up and in the bottom is a screw that holds the chuck on the shaft.The screw turns in a clock wise motion to be removed and then you can top the chuck off the shaft.

power switch assembly is bad cost about $18 Part# 144124-03 available on line just search google

2 service agents for Cebu listed herehttp://service.blackanddecker.co.uk/Support/AgentLocator/DefaultBDK.aspx

Hi I have same problem with the charger. Solution is to replace the charge with new part number issued from B&D AustraliaNumber of 90515050-01 until stock runs out , then it is replaced by part number of 90578873 early to mid june 2013.Hope this helpsLance from Perth , Western Australia.

Try www.2helpu.com their international web site.