Top 20 LG LMVM1935 Convection/Microwave Oven Questions & Answers

My help file on door switches is here: http://www.microwavecontrol.com/doorsw.htm The service manual is at my site here: http://www.microwavecontrol.com/lmvm2055_sm.pdf If you need more free help, free free to contact me directly. - William E. Miller, AS-EET [email protected] http://www.microwavecontrol.com Microwave Oven Control Panel Repair Nationwide "Recycling by repairing since 1982"

EVER HEARD OF GOOGLE???? LG LMVM1935 manual Google That gets you to the manual. Page 3 is the table of contents that lists oven light replacement on page 29. Just maybe, if I teach you this you'll be able to do it yourself next time!

The magnetron is faulty causing the loud noise.

have you been to the lg website,thay should have one for free,

Opening the door while the oven is cooking will greatly shorten the life of the door switches and lead to failure. Always hit "Stop" first unless the recipe calls for it.The instructions for the child lock are in the owner's manual.To set the lock, press Stop/Clear, then hold the "0" pad for more than four seconds. You will hear two beeps and the display will show "LOCKED".To unlock, hold the "0" pad for more than four seconds. You will hear two beeps and the display will no longer show "LOCKED".

"SE" means you have a defective membrane keypad.With your full model number, I could have given you detailed instructions and parts numbers.But without that, I'll have to just be generic.If your model's membrane keypad is available as a separate part, that's usually the cheapest but most involved way to fix it. Here is a handy guide with pictures showing you what's typically involved. If it's not available separately, then you can replace either the control panel frame assembly, which comes with a new keypad on it, or the entire control box / controller assembly. There is a a YouTube video available showing how to remove a typical over the range control panel assembly in under 5 minutes. Some connectors have a lock. You can usually find helpful exploded view diagrams and order parts by entering your full model number here.We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

The difference between a convection microwave and an oven is very little. It is similar to using a fan assisted oven and should be treated as such when working out temperatures.
One may use standard containers, metal, glass etc. as long as the microwave part is not switches on!.
Hope that answers your question.

The front touch plate is a thin membrane which sticks on to the front panel of the microwave. You can not get into it. It has to be replaced as a unit.

Hi,
Here is a tip that will help you to figure out what is wrong with your Microwave Oven....

Microwave Oven Basic Troubleshooting Tips
http://www.fixya.com/support/r5508031-microwave_oven_basic_troubleshooting

heatman101

If you were to log on to the manufacturer's web site, I think you will be pleasantly surprised as usually one is able to download, by model number, Customer Instruction Manuals, list of Dealers and Driver downloads as required.

Just Google the manufacturer's name and follow the links. Make certain you are directed to the manufacturer's web site as some search engines direct you to other sites and they charge for the information that is normally free of charge.

I hope this helps.

The oven lamp is accessible when the whole outside cover of the oven is removed. The lamps these days are a special bulb and would be available from a TV repair place or a appliance repair centre.Take the old lamp in with you to pbtain the correct part.

Best price you can get this is 11, 990 Rs.

Source: Compareindia

Thank you for using Fixya. Your generous rating is much appreciated. If you need further help, reach me via phone at https://www.6ya.com/expert/elixirjose_00375ea24bd8141b

web site assistance type in name and model

Hi,
Here is a tip that will help you to figure out what is wrong with yourMicrowave Oven....

Basic Microwave Oven TroubleshootingTips

heatman101=--=

The magnetron (the part that heats the food) may be bad or the circuitry to the magnetron may have burned out. Basically my advice is that if you have no electrical expertise, it isn't worth fixing. The magnetron if bad, costs almost as much as a new microwave. If you open it up (make sure it has been unplugged for a few hours and don't seen any obvious burnt parts (including a fuse and the diodes), then most likely the magnetron is done and a new microwave is the way to go.

Let me know how this works out for you.

Benjamin

Paper towel can be quite abrasive. Use DeBruce Polish with a soft terry towel. We use DeBruce Polish on all of our stainless steel. DeBruce Polish also works on glass cook tops. We get DeBruce Polish at debrucepolish.com.

If the model number is correct, there is a 125V, 20 AMP line fuse inside the microwave. Its usually mounted at the point where the power cord enters the back of the unit. Unfortunately, you will need to uninstall the oven, UNPLUG it and remove the exterior case to access. The case comes off in various ways depending on manufacture and model. I found this illustration at searspartsdirect.com based on the model number you listed this question under:

http://www.searspartsdirect.com/partsdirect/showSubComp.pd?imageUrl=http%3a%2f%2fc.searspartsdirect.com%2flis_png%2fPLDM%2f50026410-00007.png

The line fuse is listed as item 8 (part number 3B74133K). There is a another fuse listed as item 2 (part number 3B72974C), but this is a thermal fuse for the fan motor.

You can usually purchase a box of fuses at a hardware store for just a little more than what the manufacturer charges for a single fuse. 125V, 20AMP Ceramic Slow Blow fuses are recommended. If you wish to order on line, use the part numbers to search by comparison as the model number you listed this question under is not available at all the websites I have provided. The parts, however, ARE listed.

If you have any questions, or need additional assistance troubleshooting, please post back and let me know. I hope you find this information helpful.

NOTE: Make sure you take any resistance readings with the microwave UNPLUGGED and the component under test isolated (removed) from the circuit. To answer your initial question, "yes", these ovens can blow a fuse by simply sitting idle. This can occur from any power fluctuations, brown outs, voltage spikes, etc. Or, it could be the symptom of a component that may have failed. If you find any of the internal fuses blown and replace it, only to have it blow again, you have a more significant problem than a simple blown fuse.

I suggest you google search for a manual... or put test food in and press
30 cook... or 30 start... or click your heels 3 times and try again... Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/lisa_52daba487e5b4d53

I replaced outer door with key panel on my LG MICRO MODEL LMVM2055ST which solved my problem but when I went to put the handle back on it did not fit. The tophole in new panel for the handle is round and the old one is rectangle. LG says I have right part can not help me.A new handle comes rectangle shape. What now?