20 Most Recent
Husqvarna Lawn Tractor 48" Deck, 23 Hp, Model# Yth2348 - Page 6 Questions & Answers
When you inguage the ele pto it kill the engine whats the problem?
It could be a number of different things.
The starter switch has 2 different positions for safety. One will kill the engine while backing.
Have you tried engaging it with the switch in both positions? I would check that first.
If it doesn't kill the engine while in the safety bypass mode for backing, it would probably be a bad or stuck limit switch on the reverse linkage.
I have a 2005 poulan pro 42in 24hp riding mower, blades wont engage when pto switch is pulled
You should have a two wire plug that comes up from underneath near the front where the machines engine crankshaft is. Normally the wires are one colored red the other black with the key in the run position engine (OFF) there should be battery voltage or close to it. Which can be measured with a voltmeter. With the PTO switch in the on position. If you have voltage you have a bad electric PTO if no voltage then you'll have to check voltage to and from the switch itself. Someone should be sitting in the seat to perform the test for on many machines the safety switches won't allow the PTO to be engaged unless someone is on the machine. A wiring diagram would help you trace the wiring to the switches and PTO much easier.
Need a belt diagram for
ttp://www.partstree.com/parts/dispdiagimg.php?src=r&ilFN=D%3A%5CEMPARTweb_52%5CCatalog+Data%5CEMP_IMG%5CHUS%5Cimages%5C90%5C35%5C0019.TIF&ilSC=10&ilIV=0&ilBR=0&ilIF=G&ilRE=8&ilSH=0&ilEG=0&ilRO=0&ilSC=23
Where are the jets on a lawnboy 10247 push mower that purges when started ?
I need a little more information such as the engine manufacturer and the numbers off the tag on engine and what do you mean it purges do you mean the engine changes speed without you moving the throttle. This could be caused by restricted air cleaner or loose carburetor or either partially clogged carburetor
Not finding what you are looking for?