20 Most Recent
Jeanie Rub Single Speed Massager - Page 11 Questions & Answers
I turned on my tanning bed lights came on . Fans on them it started beeping and lights go off , fans stay running. Had to shut off breaker to make beeping turn off
If your tanning bed is beeping and the lights are turning off but the fans are still running, it is possible that there is a malfunction with the bed's control system. Here are some steps you can take to troubleshoot the issue:
1. Check the power source: Ensure that the power cord is plugged in securely to the outlet and that the outlet is functioning properly. If you have a dedicated circuit for your tanning bed, check to see if the circuit breaker has tripped.
3. Check the bulbs: Inspect the bulbs for any signs of damage or wear. If the bulbs are old or have cracks, they may need to be replaced.
4.
5. Check the timer: Make sure that the timer is set correctly and that it is not malfunctioning. If the timer is not working properly, it may need to be replaced.
6.
7. Check the bed's manual: Consult the owner's manual for your tanning bed to see if there are any troubleshooting steps or error codes listed that may help you diagnose the problem.
8. Contact the manufacturer or a professional technician: If you are unable to diagnose or fix the issue on your own, it may be best to contact the manufacturer or a professional technician to assist you with repairing the bed
What method can lower blood pressure quickly?
There are several methods that can help lower blood pressure quickly, including:
- Deep breathing: Take slow, deep breaths for a few minutes. This can help relax your body and lower your blood pressure.
- Exercise: Engage in some physical activity, even if it's just for a few minutes. Exercise can help lower blood pressure by improving blood flow and reducing stress.
- Drink water: Drinking water can help reduce blood pressure by increasing blood volume and reducing the concentration of sodium in the blood.
- Limit caffeine intake: Caffeine can increase blood pressure in some people, so it's best to limit your intake of coffee, tea, and other caffeinated beverages.
- Reduce stress: Stress can raise blood pressure, so try to find ways to relax and reduce stress. This can include deep breathing exercises, yoga, or meditation.
- Take medication: If your blood pressure is dangerously high, medication may be necessary to quickly lower it. Consult with a healthcare professional before taking any medication.
It's important to note that these methods may not work for everyone and should not replace medical treatment for high blood pressure. If you have concerns about your blood pressure, consult with a healthcare professional.
How to test your sugar levels at home
go to your doctors and get a diabetic test kit prescription from your chemist / pharmacist
they will supply you with a test kit and test needles
using the machine supplied
pierce the skin of a finger and put the machine sensor on the blood and check the reading on the screen
make sure that you get all the sheets from your doctor as sugar levels are critical and should only be done with a doctors knowledge
if you are in a country that doesn't have a diabetic support system, work more closely with your treating doctor
Sunvision Model L- 28LEB won't come on and I cannot locate fuse anywhere? It was working fine and we had some power surges now no power to it all?
I'm sorry to hear that your Sunvision Model L-28LEB is not turning on. It is possible that the power surges may have caused some damage to the internal components of the device. However, before jumping to any conclusions, let's check if the fuse is the culprit.
According to the user manual for the Sunvision Model L-28LEB, the fuse is located on the power supply board inside the device. To access the power supply board, you will need to remove the back cover of the device.
Here are the steps to remove the back cover and access the power supply board:
- Turn off the power to the device and unplug it from the electrical outlet.
- Locate the screws that hold the back cover in place. These are typically located on the edges of the back cover.
- Use a screwdriver to remove the screws and carefully remove the back cover.
- Look for the power supply board inside the device. It is usually located near where the power cord enters the device.
- Check the fuse on the power supply board. It is a small, cylindrical component with metal ends.
- If the fuse is blown, replace it with a new one of the same rating. The rating should be listed on the fuse itself or in the user manual.
- Reassemble the device by replacing the back cover and securing it with the screws.
If the fuse is not the problem, there may be other issues with the internal components of the device. In that case, it may be best to contact a qualified technician for repair or replacement.
How to reset BFM144DQ3-99 scale, lose manual!
To reset the BFM144DQ3-99 scale, you can try the following steps:
- Remove the batteries from the scale.
- Press and hold the power button for 10 seconds.
- Release the power button and wait for 10 seconds.
- Reinsert the batteries.
- Press the power button to turn on the scale.
If the scale still does not reset, you can try contacting the manufacturer for assistance or searching online for a copy of the user manual.
My Quantum Q6 wheelchair seat not tilting
- Check the tilt switch: Your wheelchair may have a tilt switch that controls the seat tilt. Make sure this switch is in the correct position and that it is not damaged.
- Check the wiring: It's possible that there is a problem with the wiring that controls the tilt feature. Check all the wiring connections to make sure they are secure and not damaged.
- Check the motor: The tilt function is powered by a motor. If the motor is not functioning properly, the seat may not tilt. Check the motor to make sure it is running and not damaged.
- Contact your provider: If you have tried these troubleshooting steps and are still experiencing issues, you should contact the provider who sold you the wheelchair. They may be able to provide additional support or send a technician to diagnose and fix the problem.
It's important to get the issue resolved as soon as possible, especially if you are stuck in a tilted position. Please take care and I hope this help
Is there a cure for arthritis?
there is no cure for rheumatoid or osteoarthritis, you can take medications to reduce inflammation, do physical therapy, or wear a brace
How do i find my medicare number
look on your medicare card
http://www.humanservices.gov.au/customer/enablers/medicare/medicare-card/lost-or-stolen-medicare-cards
Not finding what you are looking for?
