Belkin N Wireless Modem-Router F5D8633au4A - Answered Questions & Fixed issues

Connect Router - Desktop

Open RSP By typing 192.168.2.1

On the Left side under Internet WAN Click Connection
Type

Leave the password blank and click Submit

The Connection Type Should Be Dynamic

Click Next

There should not be any Host name & Click apply

On the left Side Click MAC Address Under Internet WAN

Click Clone And Click Apply Changes

It Should Work

Disconnections are generally relative to the Internet Provider and Speed. If the speed drops, the router can disconnect and reboots. Just make certain you always update all drivers and especially if you are in Windows, keep up with current updates. Check your device drivers and do update from there also.

Sir, Check your IP Address, Maybe its conflict with other device. My advice to turn it automatically. Or Installing your Belkin router is still possible even without using its Setup CD. You can set up your router manually through the web-based setup page of the router. Perform the steps below to set up your Belkin router through the web-based setup page. NOTE: images may vary depending on the router model or computer you are using.

Power cycling the modem and router Step 1: Unplug the modem and router from the power source. Step 2: Connect the modem to the WAN or Internet port of the router.

Step 3: Power ON your modem first, then your router by plugging them back to the power source. Manually setting up your router Step 1: Connect the computer to one (1) of the Ethernet ports of the router. Step 2: Launch a web browser and enter "192.168.2.1" in the address bar. Step 3: Click Login. Step 4: Leave the Password field blank and click Submit. Step 5: Under Internet WAN, click Connection Type. Step 6: Select your Connection Type, then click Next. NOTE: If you don't know your Connection Type, contact your Internet Service Provider (ISP). To know how to set up your router according your ISP, refer to the links below: Cable Internet Service PPPoE / DSL Static IP Account Step 7: Enter the details provided by your ISP and click Image. You should now be able to connect to the Internet. To verify, Internet Status on the upper right corner should read Connected. You can also launch a web browser and go to your favorite website or try visiting the Belkin Site for more information and support on your devices. as mention On official Belkin website vedio for Belking Online Support: Setting up the Belkin router using an iOS device Video Belkin Or In case you still need assistance then follow us for Belkin Tech Support on:Belkin Support

• Reinstall product as per user manual exactly & connect router directly to the MODEM.
• Try connecting with a wire [ethernet] cable at first to set up PSK (personal shared key).
• Ensure PSK is correct at log on to network on wireless device.

1st this question probably doesn't belong in Wireless router problems. 2nd. You can refill some cartridges, but newer version are "date stamped" so even if you refill it, it won't work past the date stamp. Always check when you buy and get the newest boxes, Clearance ones are usually on clearance because of the expiration date.

When you speak to Comcast you should see if they are providing you with a wireless modem/router that will be everything you need.If so, you will not need the Belkin router as Comcast will supply you with the hardware you need. If they only give you a modem, your Belken wireless router should work fine with the Comcast modem.Hope that helps!

If you want to reset the settings of your router, you have to press and hold the reset key for more than 30 secs. After that power off and then restart your router.** You can also avail our technical support by visiting our website: http://www.vtechsquad.com.

To connect your computer to a wireless router, you click the Refresh network list, then Choose your wireless network and then click Connect to your secured Wireless Network, it will asks for a Network Key before allowing you to connect into your wireless network. This Network Key is either the WEP, or WPA or WPA2 Encryption key that is configured in the Wireless settings in the Router. The Passphrase is an alternate way to setup the Encryption key. When you are requested for a Network Key, you can just enter the Passphrase or WPA or WPA2 key that was used to configure the Encryption key in the wireless router. http://www.fixya.com/support/r5270415-network_password_network_address For information on securing your wireless network, configuring the wireless router and configuring the wireless card in the laptop/computer, please click on this link and follow my instructions :- http://www.fixya.com/support/r3559128-wireless_router_security

I would ask your service provider if that modem is on the compatibility list.

Try the user manual: http://networking.belkin.com/update/files/F5D8633-4/v1/WW/F5D8633uk4_v1000_mnl.pdf

You also may want to check the status of you router by logging into it and checking the "status" page(IP) And try to update the firmware..

Connect a LAN cable from Belkin to your laptop/computer's LAN port, open a browser on your laptop/computer and enter the Belkin's configuration URL. http://192.168.2.1 The default PW = blank (just press Enter) You can now change the default admin password. You can now configure the wireless settings to protect your wireless network and Internet from unauthorized access. Now configure the wireless card in your computer/laptop with the router's wireless settings. To secure your wireless network from unauthorized access, please click on this link and follow my instructions :- http://www.fixya.com/support/r3559128-wireless_router_security

Maybe this will help: http://www.midcocomm.com/_files/files/SBG6580.pdf

It's not up yet . Do you know of anyone else on it already? I think it's still being fixed.

With an ethernet cable plugged into the back of the Belkin, open a command prompt and type ipconfig. Next check what your gateway address is and open your browser and type in the gateway address should be something like http://192.168.0.1then you should see a web page that is the menu of configuration for the router.

If you connect the computer to the modem directly , does it work ?
If that works then the modem is working.
now connect the computer and the modem to the router and open the set up page of the router.
Here you can change the settings of the router.

Click Here for step by step instruction on how to set up router

by default, Belkin comes without a default password, so just click on submit if you are trying to log in to router's GUI page,.(later you can change the password by clicking on system settings and type in the new password you like to use, also you need to leave the current password column blank)if you are trying to get the wireless key, to connect your laptop or i pad or any other device,or of there is any other help needed, please reply to this post, will give you more instructions on how to do it.

The best top-shoppingmall showed many hi-tech Quality Electronic Gadgets and technology.Maybe it will be helpful .

Hi,

These interference are caused by unfiltered telephone lines, electronic gadgets near the phone or router. Make sure your phones are all filtered and there are no electronic gadgets near the phone or router and keep the phone at least 3-5 feet away from the router.

Thank you for choosing FixYa! Your rating will help me succeed and continuously help a lot people.

If you have any computer conncted to the router then open the setup page of the router and check the wireless settings.See How to find wireless network key