Top 20 Belkin N Wireless Modem-Router F5D8633au4A Questions & Answers

Disconnections are generally relative to the Internet Provider and Speed. If the speed drops, the router can disconnect and reboots. Just make certain you always update all drivers and especially if you are in Windows, keep up with current updates. Check your device drivers and do update from there also.

Sir, Check your IP Address, Maybe its conflict with other device. My advice to turn it automatically. Or Installing your Belkin router is still possible even without using its Setup CD. You can set up your router manually through the web-based setup page of the router. Perform the steps below to set up your Belkin router through the web-based setup page. NOTE: images may vary depending on the router model or computer you are using.

Power cycling the modem and router Step 1: Unplug the modem and router from the power source. Step 2: Connect the modem to the WAN or Internet port of the router.

Step 3: Power ON your modem first, then your router by plugging them back to the power source. Manually setting up your router Step 1: Connect the computer to one (1) of the Ethernet ports of the router. Step 2: Launch a web browser and enter "192.168.2.1" in the address bar. Step 3: Click Login. Step 4: Leave the Password field blank and click Submit. Step 5: Under Internet WAN, click Connection Type. Step 6: Select your Connection Type, then click Next. NOTE: If you don't know your Connection Type, contact your Internet Service Provider (ISP). To know how to set up your router according your ISP, refer to the links below: Cable Internet Service PPPoE / DSL Static IP Account Step 7: Enter the details provided by your ISP and click Image. You should now be able to connect to the Internet. To verify, Internet Status on the upper right corner should read Connected. You can also launch a web browser and go to your favorite website or try visiting the Belkin Site for more information and support on your devices. as mention On official Belkin website vedio for Belking Online Support: Setting up the Belkin router using an iOS device Video Belkin Or In case you still need assistance then follow us for Belkin Tech Support on:Belkin Support

1st this question probably doesn't belong in Wireless router problems. 2nd. You can refill some cartridges, but newer version are "date stamped" so even if you refill it, it won't work past the date stamp. Always check when you buy and get the newest boxes, Clearance ones are usually on clearance because of the expiration date.

When you speak to Comcast you should see if they are providing you with a wireless modem/router that will be everything you need.If so, you will not need the Belkin router as Comcast will supply you with the hardware you need. If they only give you a modem, your Belken wireless router should work fine with the Comcast modem.Hope that helps!

If you want to reset the settings of your router, you have to press and hold the reset key for more than 30 secs. After that power off and then restart your router.** You can also avail our technical support by visiting our website: http://www.vtechsquad.com.

To connect your computer to a wireless router, you click the Refresh network list, then Choose your wireless network and then click Connect to your secured Wireless Network, it will asks for a Network Key before allowing you to connect into your wireless network. This Network Key is either the WEP, or WPA or WPA2 Encryption key that is configured in the Wireless settings in the Router. The Passphrase is an alternate way to setup the Encryption key. When you are requested for a Network Key, you can just enter the Passphrase or WPA or WPA2 key that was used to configure the Encryption key in the wireless router. http://www.fixya.com/support/r5270415-network_password_network_address For information on securing your wireless network, configuring the wireless router and configuring the wireless card in the laptop/computer, please click on this link and follow my instructions :- http://www.fixya.com/support/r3559128-wireless_router_security

You also may want to check the status of you router by logging into it and checking the "status" page(IP) And try to update the firmware..

I would ask your service provider if that modem is on the compatibility list.

Try the user manual: http://networking.belkin.com/update/files/F5D8633-4/v1/WW/F5D8633uk4_v1000_mnl.pdf

Maybe this will help: http://www.midcocomm.com/_files/files/SBG6580.pdf

Connect a LAN cable from Belkin to your laptop/computer's LAN port, open a browser on your laptop/computer and enter the Belkin's configuration URL. http://192.168.2.1 The default PW = blank (just press Enter) You can now change the default admin password. You can now configure the wireless settings to protect your wireless network and Internet from unauthorized access. Now configure the wireless card in your computer/laptop with the router's wireless settings. To secure your wireless network from unauthorized access, please click on this link and follow my instructions :- http://www.fixya.com/support/r3559128-wireless_router_security

by default, Belkin comes without a default password, so just click on submit if you are trying to log in to router's GUI page,.(later you can change the password by clicking on system settings and type in the new password you like to use, also you need to leave the current password column blank)if you are trying to get the wireless key, to connect your laptop or i pad or any other device,or of there is any other help needed, please reply to this post, will give you more instructions on how to do it.

If you have any computer conncted to the router then open the setup page of the router and check the wireless settings.See How to find wireless network key

The best top-shoppingmall showed many hi-tech Quality Electronic Gadgets and technology.Maybe it will be helpful .

If you have a wireless router and it is connected to the DSLor cable modem then - To connect to your wireless router, the router needsits wireless settings to be configured with the SSID, encryption key etc., alsothe wireless cards and wireless adapters in all the laptops/computers needs tobe configured with these router's wireless settings. Then the laptops/desktopcomputers can communicate with your wireless router and access the Internet via the DSLor cable modem.

On the rear panel of the router you'll find a small hole near the input/output terminals that is labeled "reset."
Use a toothpick to insert it into the hole and push it till you feel it click and hold it down until the router shuts off and the power LED begins flashing. Then release.

access the interface of the router and go on wireless there you will find the key that you have put on your router for wireless access..

Here is the step by step method ( connect a netwok cable to the router first ):

1. open your browser type in 192.168.2.1
2. Insert your username and password if it ask by default its username is admin and password:admin
3. Go on wireless
4. Click on Security
5. Copy the security key to your new laptop wireless and you should now be ready to access internet

If you need more help dont hesitate to ask me.. if it help you out please like the answer..thanks

Encryption is probably enabled in the router's wireless settings. The computersthat cannot connect to the router most like has not had their wireless cards configured with the router's encryption settings.

Theencryption key secures your data from unauthorized access. The router's password is a Passphrase or the WEP or WPA orWPA2 encryption key. The Passphrase generates the WEP or WPA or WPA2 encryptionkey and this is in the router's wireless settings. To connect to your wireless router, configure the router'swireless settings ie SSID, plus the WPAor WPA2 encryption key and then configure wireless cards in the laptops and orcomputers with these router's wireless settings. Then the laptops and desktopcomputers can communicate with your wireless router.

http://en-au-support.belkin.com/app/product/list/q/routers/

check connection to the main router