20 Most Recent
Belkin N Wireless Modem-Router F5D8633au4A - Page 3 Questions & Answers
I put in the pass
access the interface of the router and go on wireless there you will find the key that you have put on your router for wireless access..
Here is the step by step method ( connect a netwok cable to the router first ):
1. open your browser type in 192.168.2.1
2. Insert your username and password if it ask by default its username is admin and password:admin
3. Go on wireless
4. Click on Security
5. Copy the security key to your new laptop wireless and you should now be ready to access internet
If you need more help dont hesitate to ask me.. if it help you out please like the answer..thanks
6/1/2011 7:59:49 PM •
Belkin N...
•
Answered
on Jun 01, 2011
WHY IS MY WIRED LIGHT
Hello,
The wired light turn on only when your computer is connected to your router via a physical cable on port 1, 2, 3 or 4.
If you are connected wireless is normal that the light stays off.
regards
3/18/2011 9:58:30 PM •
Belkin N...
•
Answered
on Mar 18, 2011
Locked up
Some brands of consumer routers are notorious for randomly locking up, dropping connections etc.
A quick fix would be to reset the router to factory defaults. This is done by pressing the RESET button for 30 seconds and reboot the router.
The best thing you can is to make sure you keep the firmware up to date. This is a file that can be downloaded from the manufacturer's website. The files are very specific so make sure you have the full model# and version of your router.
Once you have downloaded the firmware from Belkin's website, connect to you router with a
wired connection (NOT wireless) and click on the option to upgrade software/firmware.
Firmware updates usually fix a whole slew of issues and should stop your router from locking up so often. Remember to enable security (WPA2 encryption) on your wireless network when you are finished with the upgrade, no reason to leave your network unsecured.
Belkin's website:
http://en-us-support.belkin.com/app/product/list/q/routers/
I Hope this helps,
Magoo
3/9/2011 4:39:43 AM •
Belkin N...
•
Answered
on Mar 09, 2011
The internet on the router keeps cutting out
therefore you have to talk to your ISP
about the configuration per phone
i don´t get any info for your modelnumber on belkin.com, maybe some worng digit?
what you can do yourself is restart and have a look if your computer has good wifi / wlan signal, if used.
2/24/2011 9:47:17 PM •
Belkin N...
•
Answered
on Feb 24, 2011
How do i find the wpa2 key?
Hello,
If you require the WPA2 key for the wireless network you will have to log in to the router interface and retrieve it. You can try the following steps..
1) Open internet explorer on any computer connected wired to the router. ( IF no computer is connected then connect your laptop through an Ethernet cable to the LAN slot on the router) 2) Delete everything from the address bar and type http://192.168.2.1 and hit enter. 3) Towards the left side under wireless click on security. 4) Now it will ask for the login password, do not type anything..just hit enter. 5) Now you will be in wireless security page. You should will see your password. Make a note of it. 6) Now connect to the wireless network using the keys u made a note of.
Hope this helped.
2/17/2011 5:55:44 AM •
Belkin N...
•
Answered
on Feb 17, 2011
I am trying to establish
Which is your laptop model,and which operating system is on your laptop ?
Click
here to download the latest firmware update from belkin.
After you download your firmware file click here for installation instructions.
2/8/2011 11:00:05 AM •
Belkin N...
•
Answered
on Feb 08, 2011
My belkin has an orange
Hi lil_dreamer,
The Reason why you have that message is because the Network Key on the Router did not match the Network Key that you've entered on the computer to fix this you need to access your Wireless Settings Page and check the Network Key after that we will remove the same settings on the computer and add a new one.
To access your router just open a Browser then type 192.168.2.1, password is blank. Click on the Security under Wireless. You can change the security type of your rotuer to WPA, WEP or you can also Disable the security. Personalize the Passphrase or Network Key so that you can easily remember it.
Now that we have the information needed lest configure your computer.
- Click on Start or Orb.
- Click on Control Panel.
- Select Network and Sharing Center.
- Click on Manage Wireless Networks on left under Task
- Remove all the Saved Networks on the list.
- Click on Add.
- Select Manually create a network profile.
- Enter the Network Name (SSID), Select the Encryption Type (WPA,WEP,WPA2), Enter you Passphrase or Network Key.
- Put a Tick or Check on Start this connection Manually.
- Click on Connect. Wait for the confirmation and it will work fine now.
Don't forget to say thanks. Thanks for using Fixya.
2/5/2011 1:25:41 AM •
Belkin N...
•
Answered
on Feb 05, 2011
Modem light flashing orange
what u can try is ... if u have the details for the configration... reset the router by pressing the reset button and hold the reset down for 10 to 15 secs and the router will restart ... go to the router configration page and re configure it ... and see if it works and if u still get the orange light call ur ISP and if u do not have the configration details in that case too call ISP
1/30/2011 7:28:38 PM •
Belkin N...
•
Answered
on Jan 30, 2011
Somehow only my laptop in
click start control panel administrive tools,computer management,device manager scroll down network adapters + expand Ethernet driver right click update driver,disable,uninstall also select properties general you can trobleshoot or driver to update,rollback or uninstall
a yellow? question mark means you need to install/update driver right click to install driver
hope this helps
1/13/2011 10:50:25 PM •
Belkin N...
•
Answered
on Jan 13, 2011
I have lost the security
WIRELESS SECURITY ISSUES
Step 1 : Connect Router - Computer ( Wired)
Step 2 : Open Router Setup by typing http://192.168.2.1 on the address bar of internet explorer
Step 3 : On the left under wireless click wi - fi protected setup
Step 4 : Leave the password blank and click on submit
Step 5 : Disable it and Click on apply changes
Step 6 : On the left under wireless click Security
Step 7 : Enable 64 Bit WEP
Step 8 : Type a 10 digit number on the key 1 ( 2 in each box )
Step 9 : Click apply changes
Step 10 : on the left under wireless click channel and SSID
Step 11 :Change the Wireless channel to 6
Step 12 : Change the SSID to a different name ( no Spaces )
Step 13 : Click apply changes
Step 14 : Now Scan and connect to this network ( Wireless )
Let me know if it works
Regards
TOM
1/8/2011 6:12:53 PM •
Belkin N...
•
Answered
on Jan 08, 2011
I can not connect my Wii to the internet. Also
Hi,
Click on the link below and download the tool to find out your WPA.
Read the instructions on the Download page to know how the tool works
HP Network Diagnostic Tool
After
you have downloaded and installed, open the HP Diagnostic Network tool
and click on Advanced Tool - Click Retrieve WEP/WPA and click Show.
* Please rate this solution with Thumbs up and Testimony to help us improve providing support
1/3/2011 9:34:36 PM •
Belkin N...
•
Answered
on Jan 03, 2011
Not finding what you are looking for?