20 Most Recent RIM BlackBerry? Curve 8330 Cellular Phone - Page 2 Questions & Answers

The phone carrier can give you this if you have had ur phone over a year

how to reset the Curve back to factory state (a complete wipe-out). Please note if you just want to reboot the device, you only need to take out the battery.

To reset the phone back to factory state:
Go to Options -> Security Options -> General Settings
Press the BlackBerry Menu key and select "Wipe Handheld" and type in "blackberry"

A reset of a BlackBerry smartphone is a troubleshooting method that will completely power off and restart the BlackBerry smartphone's operating system software and applications. It is a useful first step if a BlackBerry smartphone is experiencing hardware, software, or wireless network problems.
Note: A reset of a BlackBerry smartphone does not delete any settings or data.
There are two options for performing a reset: a hard reset and a soft reset.

A hard reset involves physically removing the battery from the smartphone and then reinserting it. To perform a hard reset, complete the following steps:
1) Remove the battery cover from the back of the BlackBerry smartphone.
2) Remove the battery, and then reinsert it after a few seconds.
3) Replace the battery cover.
A soft reset is a three key combination that resets the BlackBerry smartphone without removing the battery. It is only available on BlackBerry smartphone models with a QWERTY keyboard. SureType® technology and touch screen BlackBerry smartphones, such as the BlackBerry® Pearl™ smartphone, BlackBerry® Pearl™ Flip smartphone, and BlackBerry® Storm™ smartphone cannot be reset in this manner.
To perform a soft reset, complete the following steps:
1) Press and hold down the ALT key on the smartphone.
2) While holding down the ALT key, press and hold down the right-hand CAP key.
3) With both of those buttons still pressed, press the DELETE key. The display on the BlackBerry smartphone will turn off to indicate that the reset has started, and the keys can now be rIt is normal behavior
for a BlackBerry smartphone to take several minutes to completely start up following a reset.eleased.

you can reset your login details on this page Having trouble signing in

If you get "JVM Error 102" when starting your Blackberry, read this before you wipe everything!!

I had spent hours searching for a solution to this problem (I even went to my service provider) and all I could find was that I would have to wipe the contents of my phone and start all over again -- tough luck if I didn't have backups for my contacts, appointments, program data, etc.

What it comes down to is that the JVM 102 error means that a .cod file on your phone seems to be corrupt, so the phone refuses to load it. Why wipe everything for one bad file? You might not need to!

Follow these steps:

1. Download JL_Cmder
   
   
2. Connect your phone to your PC using the USB cable that came with it.
   
   
3. Run JL_Cmder and select option 2 (event log)
   
   
4. Scroll to the bottom of the log and look for "JVM Error 102." The line before it should tell you exactly what file is causing the error. It might look something like this. Save the file name; you will need it later.
   
   
5. Go to Start > Run, and type "cmd" then press Enter.
   
   
6. Change directory to the JL_Cmder installation folder.
   e.g., type: cd "C:\Program Files\JL_Cmder\" and press enter
   
   
7. Type the following command to remove the offending file:
   
   javaloader.exe -u erase -f FILENAME
   
   where FILENAME is the name of the .cod file.
   
   
8. Disconnect your phone from your PC and restart it.
   

This might not be a permanent solution, but it should at least let you boot up your Blackberry so that you can back up all your data before reinstalling everything.

You forgot your password, type blackberry and random passwords to wipe the phone and be able to use it again. Don't forget your password :) I hope this helped.

You can get your phone Sony Ericsson Xperia X10 Mini phone unlocked from Network lock using unlock code.Unlock code is the best and safest way to unlock phone.you can get such codes from your Network service provider or any third party online vendors like Unlock-Zone.com here you need to specify your country,Network name to which it is locked,IMEI number of your phone.And you can also lookup at this free guide MobileUnlockGuide.com which gives free unlocking instructions for modem and phones.Using this you can unlock your phone from Network lock easily.

Read the MANUAL and then operate have a good day .. thanks Vijaya

Hi!
There's no way for you to be able to block contacts on your blackberry phone but you can block incoming messages.All you have to do is you just have to go to DEVICE OPTIONS and then click SECURITY OPTIONS. And then after that click FIREWALL. And then select the check box beside one or more message types.and then press the MENU KEY and then click SAVE.

I don't think so, except it has a recycle bin and I doubt it.

Sounds like a corrupted OS once again, try a battery pull if you haven't already. Next you

Go to settingsPrivacyMicrophoneApp that requested the usageSelect on

It is hardware issue , then visit any workshop around your place . And repair it.

It's a fully detailed guide on how to unlock any BlackBerry.1. Insert any sim card2. Turn off all of the wireless connections3. Go to Options4. Select Advanced Options5. Select SIM Card 6. Hit menu select show keyboard (if your BlackBerry have touchscreen)7. Type "mepd" ( you will not be able to see what you are typing ) 8. Type "mep2" or "mep4" ( you will not be able to see what you are typing ) 9. Now the phone will prompt you to enter the mep code 10. if you not already have the code, then i recommend BlackBerryMEP.COM to get it from . 11. Enter the mep code ( you should see "code accepted" ) 12. Restart your BlackBerry .All done.

Does the phone still have a vailed warranty? If so inform the developers and they will send you another. I the warranty has expired unscrew the back and gain access into the keypad, check the circut board for and miss soldurings and if you can't find any put it back together and take it to a repair shop