20 Most Recent Linksys WRT160N Wireless Router - Page 5 Questions & Answers

I think you should reset your router. There is a red small button in the back or the bottom side. Press it around 30sec after release it and turn off the router(take out from the power). After 1minute turn it on again and wait until the led lighting well. If you do this methot after you have to make security settings again. open your browser and type the address usually http://192.168.1.1 after that login:admin pass: just leave it blank. if you not sure about the security setting ask somebody close to you to help. i mean WPA and other wifi network protections. so nobady can steal your internet.you can try this process to but that is quite complicate if you do not know so much about routers.http://www.computing-tips.net/Reset_Linksys_wrt120n_default_settings/

To overcome this, Reset the router from the beginning. Press and hold the reset button for 30 seconds and release the reset button. Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable. Now re-configure your router. Configure the router manually do not use the CD to do it............If you need any kind of technical assistance you can contact support cell at http://www.vtechsquad.com/

Log in web admin 192.168.1.1 No user. Password is admin. These are defaults. Hold the reset till it cycles to clear ALL custom settings.

I don't think so. It would be very prominent.

if this your own modem then connect through Ethernet port via a straight cable. most of linksys modems has configuration page IP is 192.168.1.11. type this in your web browser and go2. login is required, enter admin,admin as username,password3.if admin,admin does not work you may see it in the given manuals4. once you ar in the config. page go to wireless settings, security.5. you should be able to see "pre-shared key" if it is star hidden, you may type a new one and save configuration.i will be happy to assist more if this donot solve your problem.

THEY SHOULD BLINK IT MEANS YOU ARE CONNECTED

I think you mean you want to secure your wireless network from unauthorized access. To connect to your wireless router, the router's wireless settings needs to be configured with the SSID, encryption etc. and also the wireless cards in all the laptops/computers needs to be configured with these router's wireless settings. Then the laptops/desktop computers can communicate with your wireless router. Connect a LAN cable from the Linksys to the LAN port on your computer. Open a browser and enter the Linksys configuration URL http://192.168.1.1 The default login = admin The default PW = admin You can protect your router by changing the default admin PW (write it down and put it in a safe place) Go to the wireless configuration and set up the SSID and WPA or WPA2 encryption. Now apply these settings to the wireless card in your laptop/computer. To secure your wireless network from unauthorized access, please click on this link and follow my instructions :- http://www.fixya.com/support/r3559128-wireless_router_security b>

Hello Friend,
The first method involves using the reset button that is located at the back of the router. It isn’t hard to reset the router this way, but does require physically being in the same location as the router.
To reset the router using the reset button, use these steps:

1. Look for the red reset button at the back of the router.
2. Press and hold the reset button for approximately 5 seconds.

The second method involves logging into the administrative pages of your router. This can be done from anywhere that you can connect to your router. While not complex, there are a few more steps than using the reset button.

• Log in to the router’s administrative pages.
• Click the “Administration” menu option.
• Next, click “Factory Defaults” from the sub-menu.
• Click the “Restore All Settings” button on the screen.

I hope this Helped you..I like to know Feedback too.....Thanks for Contacting FixYa..

Please leave the user name box blank and type in admin for the password. I hope this helps and thank you.

To reset the Linksys back to the default settings - Press and hold the pinhole RESET button at the back of the router with the power ON for 20 secs. then release the RESET button. To connect to your wireless router, the router's wireless settings needs to be configured with the SSID, encryption etc. and also the wireless cards in all the laptops/computers needs to be configured with these router's wireless settings. Then the laptops/desktop computers can communicate with your wireless router. Connect a LAN cable from the Linksys to the LAN port on your computer. Open a browser and enter the Linksys configuration URL http://192.168.1.1 The default login = admin The default PW = admin You can protect your router by changing the default admin PW (write it down and put it in a safe place) Go to the wireless configuration and set up the SSID and WPA or WPA2 encryption. Now apply these settings to the wireless card in your laptop/computer. To secure your wireless network from unauthorized access, please click on this link and follow my instructions :- http://www.fixya.com/support/r3559128-wireless_router_security

type 192.168.1.1 in to your browser hit enter leave user name blank and use admin for the password then your in the router to change what ever you want.

Press and old the reset button on the router for 20 seconds. Release the reset button. Wait for 30 seconds. Power cycle the router.See How to reset Linksys router to factory default settings.Also watch video

The router's admin page is http://192.168.1.1 or http://192.168.0.1 and the default password should be either "admin" or "password" without quotes. There should be a choice under "Setup" called "Factory Reset". That will erase the settings and reset it like new.Alternatively, you can follow the procedure as given below on all the brands I've tried (Belkin, D-Link, Linksys)1. hold the reset button for 30 seconds (don't release)2. unplug the power (still holding reset) for 10 seconds3. plug power back in (still holding reset)4. hold reset for another 30 seconds - the lights will usually begin flashing in some odd pattern5. release the reset button6. wait 1 full minute or until the lights stop flashing7. unplug the power for 10 seconds, just to do a reboot8. verify the settings (e.g. SSID) are back to the defaultsGet online router/wireless router support at http://www.vtechsquad.com/linksys-router-support/ to fix Linksys router/wireless router issues.

Try resetting the router and then configure it again. To reset the Linksys back to the default settings - Press and hold the pinhole RESET button at the back of the router with the power ON for 20 secs. then release the RESET button. To connect to your wireless router, the router's wireless settings needs to be configured with the SSID, encryption etc. and also the wireless cards in all the laptops/computers needs to be configured with these router's wireless settings. Then the laptops/desktop computers can communicate with your wireless router. Connect a LAN cable from the Linksys to the LAN port on your computer. Open a browser and enter the Linksys configuration URL http://192.168.1.1 The default login = admin The default PW = admin You can protect your router by changing the default admin PW (write it down and put it in a safe place) Go to the wireless configuration and set up the SSID and WPA or WPA2 encryption. Now apply these settings to the wireless card in your laptop/computer. To secure your wireless network from unauthorized access, please click on this link and follow my instructions :- http://www.fixya.com/support/r3559128-wireless_router_security

Easiest way is by connecting to the router by its IP address from a web browser and going into the configuration and renaming it.

Reinstall the software and uncheck Home Network Defender during install.

To connect to your wireless router, the router's wireless settings needs to be configured with the SSID, encryption etc. and also the wireless cards in all the laptops/computers needs to be configured with these router's wireless settings. Then the laptops/desktop computers can communicate with your wireless router. Connect a LAN cable from the Linksys to the LAN port on your computer. Open a browser and enter the Linksys configuration URL http://192.168.1.1 The default login = admin The default PW = admin You can protect your router by changing the default admin PW (write it down and put it in a safe place) Go to the wireless configuration and set up the SSID and WPA or WPA2 encryption. Now apply these settings to the wireless card in your laptop/computer. To secure your wireless network from unauthorized access, please click on this link and follow my instructions :- http://www.fixya.com/support/r3559128-wireless_router_security

If the default password on the D-Link has been changed then - To reset the D-Link back to the default settings - Press and hold the RESET button at the back of the router with the power ON until the LEDs flash at the time the release the RESET button. (firmware version was 3.00, and upgraded to 3.05) Connect a LAN cable from the D-Link to your laptop/computer's LAN port, open the browser on your laptop/computer and enter the D-Link's configuration URL.. http://192.168.0.1 The default login = admin The default PW = blank (just press Enter) You can now change the default admin password. You can now configure the wireless settings. Now configure the wireless card in your computer/laptop with the router's wireless settings. To secure your wireless network from unauthorized access, please click on this link and follow my instructions :- http://www.fixya.com/support/r3559128-wireless_router_security