20 Most Recent Linksys WRT160N Wireless Router - Page 2 Questions & Answers

Linksys WRT160N Wireless Router installation

Got that problem before. Call Linksys Technical Support, if they cannot help try http://technicalsupport.blog.friendster.com

refresh your wireless connection by turning off the wireless switch of your laptop and then turning back after 30 sec.

Power off all of your network devices, including modem, router, and computers. Then power on each device in the following order:

1. Cable or DSL modem
2. Router
3. Computer

Wait for about 1 minute between each step, do each device has the chance to fully power up. This will reset the connection from your modem to your router and force the router to refresh it's settings. Please let me know if fixed your problem.

If you have any more questions, just come back here and leave a comment - I'm happy to help.

I have heard alot of people having this type of problem. The best would be to upgrade your firmware to another firmware such as

dd-wrt and tomato

I prefer you choose DD-WRT just go to www.dd-wrt.com and click on supported devices and just type in the last 3 digits of your router then download the firmware depending on the type of your specification. Then on the wireless make sure you put the Wireless Network Mode on Mixed.

If you need more setting please let me know i will be able to assist you much better on this..

Thanks

Setup wireless network by getting to the router page Enter this ip address in the address bar as 192.168.1.1 Hit the wireless tab and type network name in wireless network name. Once you click on save settings your network is ready to use Also secure the network by clicking on the wireless security and clisk on the security tab to protect your network.

Your Linksys router default password is ADMIN

Its ADMIN

Roter default password is ADMIN

Download this from linksys site. please follow the link. Linksys Support

Please reset the router by pressing the reset button on the router for 30 seconds and again configure the router.

Please check on the status tab that the what is the internet ip address you are getting from the page. The ip adress is if 192.168.1. then you have to change the router ip address to 192.168.2.1 on the very first page setup under the router ip address.

Linksys Support WRT160N Click downloads and choose the appropriate download for your version.

reset ur router now connect to ur router using a wired connection now setup ur router...r use network magic to assist http://www.purenetworks.com/download/ if this help vote.

you have take some precaution while doing this : Connect your iOS device to your computer. Select your iPhone when it appears in iTunes. Click the Restore button for your device. iTunes will download the iOS software file and restore your iOS device. using a previous backup http://support.apple.com/kb/HT1766 or any on call help for this 1-855-383-7238 .

The WPS button is used to configure a wifi connection with other devices that also have a WPS button. To use it you press the WPS button on the router then on the device you are trying to get access on and then both will be automatically configured.