20 Most Recent Microsoft LifeChat™ LX-3000 Headset - Page 5 Questions & Answers

first of all your ps2 does not support mic. so, if u want only sound, i suggest to buy phone jack to audio plug splitter...that thing is looks like as it can match your headset jack at first end and second end is two color jack (white n red) that can match to your ps2...you can buy it in audio shop...it is cheaper...

Check there site for the the drivers.

You can get it here. http://www.microsoft.com/hardware/download/DownloadResult.aspx?category=ICE&type=Headsets&name=LX3000&os=WVista_32&lang=en

http://www.microsoft.com/hardware/download/download.aspx?category=ICE
Go to the bottom of the page and follow the instructions on the drop down menu. It will direct you to a page where you can download the appropriate software. Good luck!

Be sure you have the latest software

http://www.microsoft.com/hardware/download/DownloadResult.aspx?category=ICE&type=Headsets&name=LX3000&os=WVista_32&lang=en

If you are hearing it on the speakers then it is possible the other computer's problem. If you are hearing it though the headset it could be a headset problem. Check your settings and try talking to a bunch of other people to assess the situation.

Try going to control panel and clicking your input and speaker settings.

http://www.microsoft.com/hardware/download/DownloadResult.aspx?category=ICE&type=Headsets&name=LX3000&os=WVista_32&lang=en

A little more info would help... Have you tried Control Panel --> new hardware?

What is wrong with them

you willneed to download the software from
http://www.microsoft.com/hardware/download/download.aspx?category=gaming

for further instructions go to

http://www.microsoft.com/nz/digitallife/gaming/how_to_connect_an_XBOX_360_controller_for_windows_to_a_computer.mspx

plug in the headset first then install the software . i had the same thing happen to me . so i just plug in the headset first then installed the software . it works just great now . ok. frank.

Do i need to download the software for microphone. When i used it i hear when it rings but cant hear the person on the other side and vice versa

Wiring a fridge thermostat typically involves connecting the thermostat to the power source and the compressor. Here's a general guide for wiring a 3-pin thermostat:

1. Identify the Pins: The thermostat will typically have three pins labeled 4, 6, and 3.
2. Connect the Power Source: Pin 4 is usually the common (C) terminal, which connects to the power source. This could be the live wire from your electrical supply.
3. Connect the Compressor: Pin 6 is often the normally open (NO) terminal, which connects to the compressor. This allows power to flow to the compressor when the temperature rises above the set threshold.
4. Ground Connection: Pin 3 is commonly the ground (GND) terminal. This should be connected to the ground wire for safety purposes.

I recommend RadioReference.com, they have detailed lists from all over the United States. In addition to frequency lists, they also include live audio, HAM radio lists, licensing information and a lot more.