Top 20 Acer 22" X223w LCD Monitor Questions & Answers

Assuming windows PC.. First, check the wire connectors are solid. Turn everything off and remove then replace all connections. Look for the speaker icon in your task bar. Bottom right of screen. Might be in the hidden icons box, right click on the speaker and choose settings from the popup menu. Wording may be different on diff versions, check to see the right set of speakers are selected. Sometimes plugging in ear phones, for example will change settings, and unplugging defaults to something else.

hi Samuel. this is all i could find from the internet. You can try a power reset to see if that helps. To do a power reset, unplug the power cable and press and hold the power key for 10 seconds. Then, release the power key and plug the monitor in and attempt to use it. If you are still unable to get a proper display, We would suggest contacting technical support to inquire about warranty repair options. Many of our monitors carry a 3 year warranty, so there is a chance you may still have warranty left. Acer Service and Support you could also try this link out. Acer 22 X223w LCD Monitor will not start up Google Search

Flat cable inside of the monitor is bad. that's happen when things are not used for months or years, Water condezation is damaging the cable or board!

can you post an image that shows what you are referring to?

test with dvi cable or other vga cable first. sometimes bios may cause this problem.

Why don't you contact Acer and pose that question to them?

There should be buttons somewhere on your monitor...one named 'Menu' there you should click on an option to change the positioning or horizontal/vertical then follow the instructions...usually the arrow keys...to move the frame to where you need it...hope I helped!

you need click on your monitor options down on your sys tray in the right hand corner, right click and there will be your options on rotating your screen

If you have two separate computers for different purposes, such as personal and work use, you may find it convenient and necessary to connect both to a single monitor. Many monitors have dual inputs, making such a connection simple. However, you might need a keyboard, video and monitor switch to accomplish this task if the monitor lacks a second input. Dual Inputs Step 1 Examine the back of your monitor for the presence of dual video inputs, such as a single VGA and DVI or HDMI output. Step 2 Connect the VGA cable to one computer. Plug the other end of the cable to the matching input on the monitor. Rotate the retaining screws until tight at both ends of the cable. Step 3 Plug the DVI or HDMI cable into the back of the second computer. Insert the other end into the monitor's digital video input. Screw down the retaining screws if you're using DVI. Using a KVM Switch Step 1 Ensure both computers are turned off. Place the KVM switch on your desk where it is within convenient reach. Step 2 Locate the video output port on the back of the KVM switch. Plug a VGA cable into this port. Plug the other end of the VGA cable into the monitor. Step 3 Plug the VGA monitor outputs from each computer into the inputs on the back of the KVM switch. Tighten the retaining screws down for each connected VGA cable on the computers and the KVM switch. Step 4 Plug the keyboard and mouse cables into their respective outputs on the KVM switch. Plug each set of keyboard and mouse cables from their ports on each computer into the matching inputs on the KVM switch. Plug each cable in sequentially to avoid mixing them up between machines. Step 5 Double-check that the mouse, keyboard and monitor cables leading from each computer all correspond to the right machine. Plug the KVM switch's power cord into a nearby AC outlet or power strip. Step 6 Turn the computers and monitor on to verify the connections are correct.

Required Items

• VGA cable
• DVI or HDMI cable
• KVM switch
• Power strip (optional)

I’m happy to help further over the phone at https://www.6ya.com/expert/arturo_82cd53a2264b6f81

To connect anything to the speakers on your acer monitor you need to use an audio patch cable that has 1/8 inch or mini headphone jacks on each end. Like this one. 5mm Male to Male Stereo Audio Cable... You connect one end to the headphone jack on your Surface RT and the other to the audio in jack on the monitor. Make sure the power is on for the monitor and that the volume on both is a third or half way up and you should be able to hear the sound. This is for the monitors user manual. Acer AL1715 User Manual Amazon com C2G Cables to Go 27413 3

It has no speakers nor audio inputs. Will have to furnish external speakers.

Depending on the age of the monitor, it most likely will be Capacitors that are leaking. I have repaired many different brands of monitors and have seen problems very similar to yours. 99% of the repairs I do are capacitor Issues. It's well worth replacing them IF the screen is still in very good shape as far as brightness and contrast. most repair kits usually cost between 12 and 20 dollars. Hope this helps! I’m happy to help further over the phone at https://www.6ya.com/expert/arturo_82cd53a2264b6f81

This is either your monitor or, more likely, your graphics card telling you it's going to fail soon.Try another monitor, if that sorts it you're done. If not, it's the video source (graphics card).

if no any power led indicator at the front panel after of shut down, the cause could be power supply failure. you will need to remove the back cover to gain access of the internal part of the monitor. look for a blown fuse or burnt parts at the power supply board. if you have an idea about electronic parts just replaced defective parts with the same rating and value. hope this can help good luck just let me know if you need further assistance.

can you please be specified the problem so i can help and give further solution.

Try checking the fuse in the plug

Test all leads that attach to your hard drive including electrical extensions,IDE,SATA

the leads from your ((motherboard to your hard drive)) make sure they have a secure connections and are not faulty or just replace them they might be faulty

make sure all leads that are attached to your drives dvd\cd 3 1/2 inch floppy have secure connections and are not faulty even the electical extensions

even something as small as an electrical fan and its lead can cause you problems or just replace them they could be faulty a computer needs all electrical power and data to continue through every working device and to have an end so any faulty leads will end up with a computer error

make sure your graphics card is securely seated with no dust built up or in the socket

if you remove your graphics check the socket to make sure its dust free

restart your computer then reinstall it this should activate found new hardware wizard

hope this helps you

You need to connect an external set of speakers to the Audio output of the harddrive, as you put it. At the rear, or some other convenient place you should find a set of at least three, "Jacks" locate the "Green" output Jack, and use that to feed the powered speakers, you then will be able to hear sounds....

Have you verified that the problem is indeed your monitor and not the video card on your PC? i would start by connecting the monitor to a laptop or another PC to verify that the same issue occurs no matter what the source. Once you've verified that, you're likely dealing with a monitor that requires repair or replacement. Hopefully it's under warranty. Hope this helps a bit.